HOUSING- 5622613 - Caterpillar

Accumulated grease and oil on an engine is a fire hazard.Remove this debris with steam cleaning or high pressure water each time any significant quantity of oil (or other fluid) is spilled on or near the engine.Wipe clean all fittings, caps and plugs before servicing.
For maximum service life of the machine, perform a thorough daily inspection before you mount the machine and before you start the engine.Perform the following procedures on a daily basis.
Operation and Maintenance Manual, "Cooling System Level - Check"
Operation and Maintenance Manual, "Engine Oil Level - Check"
Operation and Maintenance Manual, "Fuel System Water Separator - Drain"
Operation and Maintenance Manual, "Fuel Tank Water and Sediment - Drain"
Operation and Maintenance Manual, "Hydraulic System Oil Level - Check"
Operation and Maintenance Manual, "Indicators and Gauges - Test"
Operation and Maintenance Manual, "Seat Belt - Inspect"
Operation and Maintenance Manual, "Track Adjustment - Inspect"
Operation and Maintenance Manual, "Track Adjustment - Adjust"
Operation and Maintenance Manual, "Travel Alarm - Test"
Operation and Maintenance Manual, "Undercarriage - Check"Refer to the Maintenance Section for the detailed procedures. Refer to the Maintenance Interval Schedule for a complete list of scheduled maintenance.Note: Watch closely for leaks. If you observe a leak, find the source of the leak and correct the leak. If you suspect a leak or you observe a leak, check the fluid levels more frequently.
Illustration 1 g00419328Inspect the attachment control linkage, and attachment cylinders for damage or excessive wear. Make any necessary repairs.Inspect couplers and attachments for damage or excessive wear. Remove any debris. Make any necessary repairs.Inspect the lights for broken bulbs and for broken lenses. Replace any broken bulbs and any broken lenses.Inspect the engine compartment for any trash buildup. Remove any trash buildup from the engine compartment.Inspect the cooling system for any leaks, for faulty hoses and for any trash buildup. Correct any leaks. Remove any trash from the radiator.Inspect all of the belts for the engine attachments. Replace any belts that are worn, frayed, or broken.
Illustration 2 g00419334Inspect the hydraulic system for leaks. Inspect the tank, cylinder rod seals, hoses, tubes, plugs, connections, and fittings. Correct any leaks in the hydraulic system.Inspect the final drives for leaks. Make any necessary repairs.Inspect the swing drive for leaks.Make sure that all covers and guards are securely attached. Inspect the covers and the guards for damage.
Illustration 3 g00732408Inspect the steps, the walkways, and the handholds. Clean the steps, the walkways, and the handholds. Make any necessary repairs.Inspect the operator compartment for trash buildup. Check for trash buildup under the floorplate and on the crankcase guard. Keep these areas clean.Adjust the mirrors in order to achieve the best visibility.