HOUSING-BRAKE 6Y1774 - Caterpillar

With certain attachment combinations, the work tool pedal can have different functions. Always check for work tool pedal function before using the work tool pedal. Improper operation of the work tool pedal could result in serious injury or death.
Illustration 1 g01062921
(1) Lock pin
(A) Front hole
(B) Rear hole The auxiliary hydraulic control pedal is the pedal on the far left side.The auxiliary hydraulic control pedal allows modulation of the work tool's speed. To cause the work tool to move faster, push down on the pedal more. The auxiliary hydraulic control pedal can be used to operate both one-way work tools and two-way work tools.Note: For more information on work tools with one-way flow and two-way flow, refer to Operation and Maintenance Manual, "Joystick Controls".If lock pin (1) is engaged in the rear hole (B) the auxiliary hydraulic control pedal can be moved forward and backward. If you move lock pin (1) to the front hole (A), the auxiliary hydraulic control pedal is fixed in the NEUTRAL position. While the auxiliary hydraulic pedal is locked, the pedal movement is blocked and the pedal can be used as a footrest.Note: When the auxiliary hydraulic control pedal is locked, only use the pedal as a footrest. Do not stand up on the pedal or put too much weight on the pedal. This could damage the fixed pedal.Use the following procedure in order to move the lock pin (1) from one hole to the other hole:
Lift the plastic knob on the lock pin (1) with your hand and move lock pin (1) to the other hole.
Release the plastic knob. Lock pin (1) will engage into the other position automatically.