HOUSING-CLUTCH 7G4309 - Caterpillar

Illustration 1 g01450120
Illustration 2 g01156903When the electric starting motor is viewed from the drive end, the motor rotates in the following direction. ... ClockwiseNo load conditions at 25 °C (77 °F) Speed ... 7018 1517 rpmCurrent ... 147.0 27.5 AmpVoltage ... 11 VDC (A) Clearance between the pinion and the housing ... 1.02 0.76 mm (0.040 0.030 inch)Note: A maximum of three cable terminals or wire terminals may be used with the battery terminal nut (1). A maximum of two of the cable terminals may be equal to or greater than 0 AWG. (1) Final installation torque for the battery terminal nut ... 30.5 3.5 N m (270 30 lb in) (2) Final installation torque for the ground terminal nut ... 30.5 3.5 N m (270 30 lb in) (3) Final installation torque for the ground terminal nut ... 2.25 0.25 N m (20 2 lb in)Note: The switch terminal must be insulated with heat shrink tubing. Do not use molded terminals. (4) Final installation torque for the switch terminal nut ... 2.25 0.25 N m (20 2 lb in) (5) Final installation torque for the motor terminal nut ... 8 3 N m (70 27 lb in) (6) Final installation torque for the bolt for the motor frame terminal ... 8 3 N m (70 27 lb in)Solenoid kitCurrent draw at 10 V and 25 °C (77 °F) Pull-in windings ... 74 AmpHold-in windings ... 19 AmpMaximum rated current ... 1400 Amp