HOUSING GP-OUTPUT 7J2295 - Caterpillar

1. Remove handle (3) from the rod.2. Remove screws (2) and disconnect bracket assembly (1) from the housing. 3. Disconnect wire (4) and remove bracket assembly (1) from the cab. 4. Remove the two screws and magnet (5) from the lever assembly.5. Disconnect wires (6) and remove the nuts, screws and backup alarm switch (7) from the housing. The rear plate on the scraper was removed for photographic purposes only. Removal of the backup alarm is possible from under the scraper.6. Remove bolts (9) and disconnect backup alarm (8) from the scraper. 7. Remove the nuts and disconnect wires (10) from backup alarm (8). Remove backup alarm (8) from the scraper.Install Backup Alarm And Switch
1. Install wires (1) on backup alarm (2). 2. Connect backup alarm (2) to the scraper. 3. Install backup alarm switch (5) on the housing.4. Connect wires (4).5. Install magnet (3) on the lever assembly. 6. Put bracket assembly (6) in position and connect wires (7). 7. Connect bracket assembly (6) to the housing and install screws (9) that hold it.8. Install handle (8) on the rod.