HOUSING (compressor) 7N3609 - Caterpillar

Illustration 1 g02592376
Table 1
Specification for 6V-4320 Electric Starting Motor Gp
Item Qty Part Specification Description
1 1 8T-4244 Nut Torque to 30.5 3.5 N m (270 30 lb in).
2 1 8T-4244 Nut Torque to 30.5 3.5 N m (270 30 lb in).
A maximum of three cable terminals or wire terminals may be used with the nut. A maximum of two of the terminals may be equal to or greater than 0 AWG.
3 1 5C-2874 Nut Torque to 2.25 0.25 N m (20 2 lb in).
The switch terminal must be insulated with heat shrink tubing. Do not use molded terminals.
4 1 5C-2874 Nut Torque to 2.25 0.25 N m (20 2 lb in).
5 1 8T-4244 Nut Torque to 30.5 3.5 N m (270 30 lb in).
6 2 8T-4244 Nut Torque to 30.5 3.5 N m (270 30 lb in).
Current consumption at 24V and 25 °C (77 °F):
1. For Pull-in current is 51 Amp.
2. For Hold-in current is 7Amp max.
When the electric starting motor is viewed from the pinion end, the motor rotates in the clockwise direction.
No load conditions at 25 °C (77 °F):
Speed is 5500 rpm minimum.
Current draw is 140 Amp maximum.
Voltage is 24 VDC.