HOUSING 7N5453 - Caterpillar

Illustration 1 g06167745
Typical example
Table 1
Specification for 390-3924 Turbocharger Gp and 390-3925 Turbocharger Gp
Item Qty Part Specification Description
1 6 200-8038 Bolt Before assembly, apply Loctite C5A copper anti-seize to the threads.
Torque to 40 8 N m (30 6 lb ft).
2 4 164-5070 Plug Torque to 40 5 N m (30 4 lb ft).
3 18 5A-3604 Bolt Before assembly, apply Loctite 648 to the threads.
Torque to 40 8 N m (30 6 lb ft).
4 1 163-5497 Screw Before assembly, apply green Loctite 648 to the threads.
5 6 163-6443 Bolt Before assembly, apply green Loctite 648 to the threads.
Torque to 6 N m (53 lb in).
6 1 445-7794 Compressor Wheel Before assembly, apply Loctite C5A copper anti-seize to the threads.
Torque to 610 30 N m (450 22 lb ft).
7 - - Apply 5.0 mm (0.20 inch) bead at location on complete circumference of outlet housing without any gaps.
Before assembly, apply black Loctite 593 to the bearing housing.
Assemble outlet housing to bearing housing within 5 minutes of applying the sealant.
Sealant must be cured for minimum 2 hours before turbocharge is put into service.
Illustration 2 g06167747
Table 2
Item Qty Part Specification Description
8 1 200-8029 Speed Sensor Gp Torque to 12 2 N m (106 18 lb in).
9 7 8T-4244 Nut Torque to 70 5 N m (52 4 lb ft).
Illustration 3 g06167749
Inlet assembly
Table 3
Item Qty Part Specification Description
10 2 164-5469 Plug Torque to 40 N m (30 lb ft).