HOUSING-RECEPTACLE 7N9738 - Caterpillar

Cross-Reference Information for Event Codes
Table 1 is a list of the event codes for the engine. The event codes are cross-referenced with the appropriate procedure that can be used to troubleshoot the code.Event codes are generated when abnormal operating conditions exist. A further explanation of event codes and the engine monitoring system are described after Table 1.
Table 1
Cross-Reference from Event Codes on Cat Data Link to Troubleshooting Procedure
Code and Description Troubleshooting Procedure
E015 (2)
High Engine Coolant Temperature Derate Troubleshooting, "Coolant Temperature Is High"
E017 (1)
High Engine Coolant Temperature Warning
E025 (2)
High Inlet Air Temperature Derate Troubleshooting, "Inlet Air Temperature Is High"
E027 (1)
High Inlet Air Temperature Warning
E030 (1)
High Transmission Oil Temperature Warning Troubleshooting, "Transmission Oil Temperature Is High"
E039 (2)
Low Engine Oil Pressure Derate Troubleshooting, "Oil Pressure Is Low"
E056 (1)
High Fuel Temperature Warning Troubleshooting, "Fuel Temperature is High"
E057 (2)
Low Engine Coolant Level Derate Troubleshooting, "Coolant Level Is Low"
E059 (1)
Low Engine Coolant Level Warning
E096 (1)
High Fuel Pressure Troubleshooting, "Fuel Pressure Is High"
E096 (2)
High Fuel Pressure Troubleshooting, "Fuel Pressure Is High"
E096 (3)
High Fuel Pressure Troubleshooting, "Fuel Pressure Is High"
E100 (1)
Low Engine Oil Pressure Warning Troubleshooting, "Oil Pressure Is Low"
E105 (1)(1)
Turbocharger Turbine Intake Air Temperature High Derate Troubleshooting, "Turbocharger Turbine Intake Air Temperature High Derate"
E105 (2)(2)
Turbocharger Turbine Intake Air Temperature High Derate Troubleshooting, "Turbocharger Turbine Intake Air Temperature High Derate"
E113 (1)
High Transmission Oil Pressure Troubleshooting, "Transmission Oil Pressure Is High"
E119 (1)
Low Fuel Level Add fuel to the fuel tank. Refer to the literature that is provided by the OEM of the vessel for the correct procedure.
E173 (1)
High Exhaust Temperature Warning Troubleshooting, "Exhaust Temperature Is High"
E190 (1)
Engine Overspeed Warning Troubleshooting, "Engine Overspeeds"
E198 (1)
Low Fuel Pressure Warning Troubleshooting, "Fuel Pressure Is Low"
E198 (2)
Low Fuel Pressure Warning Troubleshooting, "Fuel Pressure Is Low"
E198 (3 )
Low Fuel Pressure Warning Troubleshooting, "Fuel Pressure Is Low"
E268 (1)
Unexpected Engine Shutdown Troubleshooting, "Engine Shutdown Occurrence"
(1) Severity does not apply to event code E105. E105(1) will be the event when turbocharger turbine intake air temperature is high and the high exhaust temperature warning system status is enabled.
(2) Severity does not apply to event code E105. E105(2) will be the event when turbocharger turbine intake air temperature is high and the high exhaust temperature warning system is disabled.
Table 2
E105 (1) Enabled
E105 (2) Disabled Parts of the Event Code
Event Code - The "E" identifies the code as an event code. The "XXX(X)" represents a numeric identifier for the event code. The fourth "(X)" assigns one of three levels to the active event code according to the severity of the abnormal system condition. This is followed by a description of the code. Refer to the following example:
E360(1) Low Oil Pressure
E360(2) Low Oil Pressure
E360(3) Low Oil PressureThe definition for the levels of severity for an event are defined below:Level 1 - Level 1 alerts the operator that an engine system requires attention. The operator should check the involved system condition or the operator should perform maintenance on the involved system at the earliest possible time.Level 2 - Level 2 requires a change in the operation of the engine or the performance of