HOUSING ASSEM. 7S7012 - Caterpillar

Crushing hazard (hand)
Pinch point
Fire hazard
Electrical Shock - Hazard
Fire hazard Safety Warnings
At operating temperature, the hydraulic tank is hot and under pressure.Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin.Remove the filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand. Remove the filler cap slowly in order to relieve pressure.
Personal injury or death can result from escaping fluid under pressure.Escaping fluid under pressure, even a very small pin-hole size leak, can penetrate body tissue and cause serious injury and possible death. If fluid is injected into your skin, it must be treated immediately by a doctor familiar with this type of injury.Always use a board or cardboard when checking for a leak.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
To prevent dirt and contaminants from entering the hydraulic system, always plug or cap the lines, fittings, or hoses as they are disconnected.This action also lessens the chance of oil spills.
General Information Section
Introduction
Illustration 3 g02625583
The 223-2105 Hose Cutting Machine is capable of cutting all Caterpillar hydraulic hoses except 1543 Air Conditioning hose and 1028 Thermoplastic hose. In addition, it will cut six-spiral hose up to a 50.8 (2.00 inch) diameter.The hose cutting machine uses a hand lever to push the hose into the cutting blade. 228-7902 Lubricant is released at the cutting edge and only during the cutting process to reduce friction and extend the serviceable life of the cutting blade.For basic hose machine questions, call the Dealer Service Tools (DST) hotline. Caterpillar does not assume responsibility for this product, especially related to operation, maintenance, and safety issues. However, Caterpillar is concerned about the safety of all personnel and strongly advises that this product be used with the utmost regard for safety at all times.Note: This manual may contain illustrations and photographs, for demonstration purposes, which slightly deviate from the actual product design.Additional Contact Information
For additional product support questions concerning this tool, contact the Dealer Service Tools Hotline at:USA: 800-542-8665, Option 1International: 1-309-578-7372Note: Continuing improvement and advancement of product design can mean some photographs or illustrations in this publication will show details that are different from your service tool.Operation and Maintenance Section
This manual only covers basic information and specifications pertaining to this product. Refer to the appropriate language version of the Uniflex OEM Manual for maintenance and operating instructions.Service Parts
Table 1
Service Parts for 223-2105 Hose Cutting Machine    
Part No.     Description    
223-2106     Blade    
228-7902     Lubricant    References
This manual is also produced in several languages, as listed.Tool Operating Manual, NEHS0860-01,