HOUSING 7W6092 - Caterpillar

Disassembly Procedure
Start By:
Remove the compensator valve. Refer to Disassembly and Assembly, "Compensator Valve - Remove" for the machine that is being serviced.Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Illustration 1 g00568243
Remove the plug and O-ring (1) .
Illustration 2 g00568245
Remove cap nuts (2) .
Illustration 3 g00568246
Remove nuts (3) .
Illustration 4 g00568248
Remove adjustment screw (4) and the washers.
Illustration 5 g00568250
Remove plug (5) and the seal.
Illustration 6 g00568251
Remove seat (6) .
Illustration 7 g00568254
Remove the outer springs (7) .
Illustration 8 g00568278
Remove the inner springs (8) .
Illustration 9 g00568279
Remove spring retainers (9) .
Illustration 10 g00568281
Remove plugs (10) .
Illustration 11 g00568282
Remove seals (11) .
Illustration 12 g00568283
Remove spools (12) .
Illustration 13 g00568285
Remove orifice valve (13) .
Illustration 14 g00568286
Remove seal (14) from orifice valve (13) .
Illustration 15 g00568290
This is an exploded view of the compensator.