HOUSING AS-CLUTCH 8E0360 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Loctite 263 -
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Drain the fluid from the hydraulic tank into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Refill Capacities".
Illustration 1 g06185916
Remove bolts (2) and open grill assembly (1).
Illustration 2 g06185917
Illustration 3 g06185918
Disconnect hose assemblies (3).
Illustration 4 g06185920
Remove bolts (4) and reposition valve (5).
Illustration 5 g06185922
Remove bolts (6) and hydraulic oil cooler (7).
Repeat Step 2 through Step 5 for the other side.Installation Procedure
Install hydraulic oil cooler (7) in the reverse order of removal.
Apply Tooling (A) to the threads of bolts (6).