HOUSING 8N3544 - Caterpillar

(4)Bucket Positioner Tube
Fill oil cup.(5)Bucket Positioner Bearings
Lubricate 2 fittings. (6)Bucket Control Cylinders And Linkage Bearings
Lubricate 4 fittings on each side of machine. Lubricate 2 fittings on each side. Lubricate 4 fittings on each side.(7)Lift Arm And Lift Cylinder Bearings
Lubricate 1 fitting on each side. Lubricate 2 fittings on each side. Lubricate 3 fittings on each side.(8)Radiator
1. Remove cap slowly to relieve pressure. 2. Maintain coolant level at bottom of fill pipe.(9)Precleaner
1. Remove precleaner rain cover and inspect tube openings. 2. If precleaner needs cleaning, remove and wash in warm water or brush or blow dirt from housing and tubes. 3. Install precleaner and rain cover.