HOUSING 8R0927 - Caterpillar

Illustration 1
Illustration 2
Illustration 3
Illustration 4
Illustration5 Illustration 6
Illustration 7
Illustration 8
DEALER INSPECTION FORMTECHNICIAN______________________ SERIAL NO: _____________ HOURS ________W.O. NUMBER _______________________Seg 01 DATE OF INSPECTION ___/___/___CUSTOMER_____________________________ JOBSITE___________________________NOTES: - MAKE "DETAILED/THOROUGH NOTES"FOR SIMS REPORTING- MARK UP ILLUSTRATIONS TO DOCUMENT AREASOF CONCERN- ANY CRACKS (REGARDELSS OF LOCATION) MUSTBE MARKED
CHECK EACH BOX TO INSURE ALL AREAS ARE INSPECTED
Inspect Engine End Frame (EEF) for Cracks(SMCS 7051):
1. Upper Hitch Boss to plate weld and spreaderplate welds (Pay close attention on bottom side of top platebehind center pin at top. If PS40278 has not been completed on this machine,consider doing the rework concurrent with this service letter):______________________________________________
2. Lower Hitch boss to plate weld and articulation stops: ____________________________________________________________________________________________________________________________
3. Axle Trunnion and Engine Mount casting to side plate welds: _____________________________________________________________________________________________________________________
5. Lower Transmission Mount:________________________________
________________________________________________________________
6. Welds at Steering Cylinder Brackets:______________________
________________________________________________________________
7. Crossmember to Frame Rails:_______________________________
________________________________________________________________
Additional Comments: ___________________________________________
Any additions or concerns please document toadd to next inspection.
_________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________
4. _________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________
2. FINAL STEP?Enter SIMS Reports forALL problems noted.
Technician Signature ___________________________Date __________