HOUSING-SPINDLE 8W4654 - Caterpillar

Example of the Tilt Sensor Calibration
Service > Calibrations > Implement > Implement Linkage Sensors > Tilt Sensor
Illustration 2 g03699751
Press the "Implement" button. The "Implement" button will highlight in yellow and the Implement menu screen will appear.
Illustration 3 g03699762
Press the "Linkage Sensors" button. The "Linkage Sensors" button will highlight in yellow and the Linkage Sensors screen will appear.
Illustration 4 g03699774
Press the "Tilt Sensor" button. The "Tilt Sensor" button will highlight in yellow and the Tilt Sensor calibration screen will appear.
Illustration 5 g03699779
Read the safety statement. Press the "OK" button to proceed. Press the Back button (2) to return to the previous menu.
Illustration 6 g03699783
Press the OK button to start the calibration.
Illustration 7 g03699792
(3) Abort Button
(4) Next Button
Follow the instructions on the screen. Press the ABORT button (3) to discontinue the calibration. Press the NEXT button (4) to continue the calibration.
Illustration 8 g03699805
Follow the instructions on the screen. Press the ABORT button (3) to discontinue the calibration. Press the NEXT button (4) to continue the calibration.
Illustration 9 g03699809
Follow the instructions on the screen. Press the ABORT button (3) to discontinue the calibration. Press the NEXT button (4) to continue the calibration.
Illustration 10 g03699814
Follow the instructions on the screen. Press the ABORT button (3) to discontinue the calibration. Press the NEXT button (4) to continue the calibration.
Illustration 11 g03699822
Follow the instructions on the screen. Press the ABORT button (3) to discontinue the calibration. Press the NEXT button (4) to continue the calibration.
Illustration 12 g03699825
The "Calibration Successful" screen will appear. Press the "OK" button to acknowledge and exit the Calibration.
Illustration 13 g03699831
If the ABORT button is pressed anytime during the calibration, the "Calibration Unsuccessful" screen will appear. Press the "OK" button to proceed.
Illustration 14 g03699840
A dialog box will appear and ask, "Are you sure you want to abort?". Press the "OK" button to discontinue the calibration. Press the BACK button to return to the previous screen.