HOUSING-SPINDLE 8W4657 - Caterpillar

Ether is poisonous and flammable.Breathing ether vapors or repeated contact of ether with skin can cause personal injury.Use ether only in well ventilated areas.Do not smoke while changing ether cylinders.Use ether with care to avoid fires.Do not store replacement ether cylinders in living areas or in the operator's compartment.Do not store ether cylinders in direct sunlight or at temperatures above 49 °C (120 °F).Discard cylinders in a safe place. Do not puncture or burn cylinders.Keep ether cylinders out of the reach of unauthorized personnel.To avoid possible injury, be sure the brakes are applied and all controls are in Hold or Neutral when starting the engine.
Illustration 1 g03801183
Open the engine access door on the right-hand side of the machine.
Loosen cylinder retaining clamp (1). Remove empty ether starting aid cylinder (2) and discard the empty ether starting aid cylinder.
Remove the used gasket. Install the new gasket that is provided with every new ether starting aid cylinder.
Install new ether starting aid cylinder. Tighten the ether starting aid cylinder hand tight. Tighten the cylinder retaining clamp securely.
Close the engine access door.