8W9542 HOUSING AS-DIFFERENTIAL Caterpillar parts
784B, 785B, 789, 789B, 793, 793B
Rating:
Alternative (cross code) number:
CA8W9542
8W-9542
8W9542
CA8W9542
8W-9542
8W9542
Weight: 94 pounds 42 kg.
TRACTOR, TRUCK,
Number on catalog scheme:
3
For full view, you need register
Information:
Removal Procedure
Start By:
Engage the steering frame lock.
Release the system pressure.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Drain the hydraulic oil. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for the correct draining and filling procedures.
Drain the drum drive planetary oil. Refer to Operation and Maintenance Manual, "Drum Drive Planetary Oil - Change" for the correct draining and filling procedures.
Illustration 1 g06021171
Remove bolt (1).
Disconnect hose assemblies (2), (3), (5), and (6).
Disconnect harness assembly (4).
Illustration 2 g06021204
Attach a suitable lifting device to piston motor (7). The weight of piston motor (7) is approximately 50 kg (110 lb).
Remove bolts (8) and piston motor (7).Installation Procedure
Install piston motor (7) in the reverse order of removal.
Start By:
Engage the steering frame lock.
Release the system pressure.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Drain the hydraulic oil. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for the correct draining and filling procedures.
Drain the drum drive planetary oil. Refer to Operation and Maintenance Manual, "Drum Drive Planetary Oil - Change" for the correct draining and filling procedures.
Illustration 1 g06021171
Remove bolt (1).
Disconnect hose assemblies (2), (3), (5), and (6).
Disconnect harness assembly (4).
Illustration 2 g06021204
Attach a suitable lifting device to piston motor (7). The weight of piston motor (7) is approximately 50 kg (110 lb).
Remove bolts (8) and piston motor (7).Installation Procedure
Install piston motor (7) in the reverse order of removal.
Caterpillar parts catalog:
Parts housing Caterpillar catalog:
4P0527
HOUSING
784B, 785, 785B
784B, 785, 785B
8X1924
HOUSING
789, 793, 793B
789, 793, 793B
9X9011
HOUSING AS
768C, 769C, 771C, 772B, 773B, 775B, 776C
768C, 769C, 771C, 772B, 773B, 775B, 776C
1102224
HOUSING AS
769C, 769D, 771C, 771D, 772B, 773B, 773D, 775B, 775D, 776C, 776D, 777D
769C, 769D, 771C, 771D, 772B, 773B, 773D, 775B, 775D, 776C, 776D, 777D
1020375
HOUSING
776C, 777D, 777F, 777G
776C, 777D, 777F, 777G
2G7281
HOUSING
776C, 776D, 777, 777D, 789B, 789C, 789D
776C, 776D, 777, 777D, 789B, 789C, 789D
8E5642
HOUSING AS-CLUTCH
784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B
784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B
3T0211
HOUSING AS-CLUTCH
784B, 784C, 785, 785B, 785C, 785D, 789, 789B
784B, 784C, 785, 785B, 785C, 785D, 789, 789B
1605899
HOUSING AS
784B, 784C, 785B, 785C, 785D, 789B
784B, 784C, 785B, 785C, 785D, 789B
7I5622
HOUSING AS
784B, 785B
784B, 785B
1238502
HOUSING AS-DIFFERENTIAL
784B, 784C, 785, 785B, 785C, 785D
784B, 784C, 785, 785B, 785C, 785D
8W9541
HOUSING AS-DIFFERENTIAL
784B, 785B
784B, 785B