HOUSING 9D4448 - Caterpillar

Product Identification Number (PIN) Plate and CE Plate
Illustration 1 g02101653This plate is on the left side of the front loader frame.
Illustration 2 g02436556Model number (A)____________________Machine PIN (B)____________________Service Information Plate (C)____________________Month and Year of Manufacture (If Required) (D)____________________CE Plate (If Required) (E)Country of Origin Info Plate (If Required) (F)Local regulation may require documentation of the month and/or year of manufacture in the Operations and Maintenance Manual. Enter on line (D) above if required.CE Plate
Note: The CE plate is on machines that are going into the European Union.Note: The CE plate is on machines that are certified to the European Union requirements that were effective then.If the machine is equipped with the plate for the European Union, this plate will be attached to the PIN plate. Several pieces of information are stamped onto the "CE" plate.
Illustration 3 g01883459For machines that are compliant to "2006/42/EC", the following information is stamped onto the CE plate. For quick reference, record this information in the spaces that are provided.
Primary Engine Power (kW)____________________
Additional Engine Power (kW)____________________
Typical Machine Weight (kg)____________________
Year of Construction____________________
Machine Type____________________For the name, the address and the country of origin for the manufacturer, see the PIN plate.Eurasian Economic Union
For machines compliant to the Eurasian Economic Union requirements, the EAC mark plate is positioned near the Product Identification Number (PIN) plate (see Product Information Section of the machine Operation and Maintenance Manual). The EAC mark plate is placed on machines certified to the Eurasian Economic Union requirements effective at the time of market entry.
Illustration 4 g06094564The Month and Year of Manufacture are on the PIN plate.Manufacturer Information
Manufacturer:Caterpillar Inc.,
100 N.E. Adams Street
Peoria, Illinois 61629, USA
Entity authorized by the manufacturer at the territory of Eurasian Economic Union:Caterpillar Eurasia LLC
75, Sadovnicheskaya Emb.
Moscow 115035, Russia
ROPS/FOPS Plate
These messages are on the front post on the left side in the cab.
Illustration 5 g00902324
Illustration 6 g03502279
Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification. Do not weld on or drill holes in the structure. This will void the certification. Consult your Cat dealer to determine this structure's limitations without voiding its certification.
This machine has been certified to the standards that are listed on the certification plate. The maximum mass of the machine, which includes the operator and the attachments without a payload, should not exceed the mass on the certification plate.Sound
Illustration 7 g02763761If equipped, the certification film is used to verify the environmental sound certification of the machine to the requirements of the European Union. The value that is listed on the label indicates the guaranteed exterior sound power level LWA at the time of manufacture for the conditions that are specified in "2000/14/EC".