HOUSING 9D8969 - Caterpillar

Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g01176942
Use a suitable lifting device to position electric starting motor (6). The weight of electric starting motor (6) is approximately 25 kg (55 lb).
Install bolts (5) .
Illustration 2 g01176941
Connect wire (4) .
Illustration 3 g01176940
Install cover (2) and nut (3) .
Illustration 4 g01176939
Connect cable assemblies (1) .
Turn the battery disconnect switch to the ON position.
Close the engine hood.