HOUSING 9F5404 - Caterpillar

Table 1
QTY     Part number     Part name    
4     4H-1225     Washer    
6     7S-3916     Clip    
6     7S-3919     Clip    
6     5P-8939     Grommet    
6     7X-7729     Washer    
4     8T-4186     Bolt    
Illustration 1 g01516645
Illustration 1 shows the tubes and the location of the new hardware.Use each item that is shown in table 1 at each location one time. The four locations are shown in illustration 1.Note: The 4H-1225 Washer should be placed between the clip and the bracket in order to avoid interference.
Illustration 2 g01516730
Illustration 2 shows the location for the grommets on the 262-5626 Tube As .The hardware will be assembled on the 262-5626 Tube As. Use the parts that remain from table 1 at this location. Note: The existing bolts should be used for this application.The new grommet and clips are effective with the following machines.
826H (S/N: AWF474-UP)