9T4121 HOUSING Caterpillar parts
120G, 12G, 130G, 140G, 14G, 160G, 16G, 916, IT18B
Rating:
Alternative (cross code) number:
CA9T4121
9T-4121
9T4121
CA9T4121
9T-4121
9T4121
Weight: 0.45 pounds 0 kg.
INTEGRATED TOOLCARRIER, WHEEL LOADER,
Compatible equipment models: 9T4121:
Information:
Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A (1)     221-9778     Puller Stud     1    
128-7889 Bridge Puller     1    
9U-6877 Thrust Bearing     1    
5P-8247 Hard Washer     1    
4K-0367 Nut     1    
( 1 ) The tools that are listed in the chart are part of the 9U-6891 Injector Tool Group .Start By:
Remove the electronic unit injectors. Refer to Disassembly and Assembly, "Electronic Unit Injector - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01002969
Illustration 2 g01002972
Install the puller stud from Tooling (A) into unit injector sleeve (1) .
Install the following parts from Tooling (A) over the stud: bridge puller, thrust bearing, hard washer and nut. See Step 1.
Tighten the nut until unit injector sleeve (1) is pulled free of the cylinder head assembly.
Remove Tooling (A) from the unit injector sleeve.
Repeat Steps 1 through 4 in order to remove the remaining unit injector sleeves.
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A (1)     221-9778     Puller Stud     1    
128-7889 Bridge Puller     1    
9U-6877 Thrust Bearing     1    
5P-8247 Hard Washer     1    
4K-0367 Nut     1    
( 1 ) The tools that are listed in the chart are part of the 9U-6891 Injector Tool Group .Start By:
Remove the electronic unit injectors. Refer to Disassembly and Assembly, "Electronic Unit Injector - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01002969
Illustration 2 g01002972
Install the puller stud from Tooling (A) into unit injector sleeve (1) .
Install the following parts from Tooling (A) over the stud: bridge puller, thrust bearing, hard washer and nut. See Step 1.
Tighten the nut until unit injector sleeve (1) is pulled free of the cylinder head assembly.
Remove Tooling (A) from the unit injector sleeve.
Repeat Steps 1 through 4 in order to remove the remaining unit injector sleeves.
Cat SIS web machinery list:
Parts housing Caterpillar catalog:
6G1908
HOUSING AS-DRIVE
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 160G, 160H, 160H ES, 160H NA, 163H, 163H NA
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 160G, 160H, 160H ES, 160H NA, 163H, 163H NA
8D9804
HOUSING-DRIVE
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 160G, 160H, 160H ES, 160H NA, 163H, 163H NA
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 160G, 160H, 160H ES, 160H NA, 163H, 163H NA
9D8972
HOUSING AS-DIFFERENTIAL
12G, 130G, 140G, 160G
12G, 130G, 140G, 160G
5T7125
HOUSING
12G, 130G, 140G, 160G
12G, 130G, 140G, 160G
5T7129
HOUSING
12G, 12H, 12H ES, 12H NA, 12K, 130G, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160G, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA
12G, 12H, 12H ES, 12H NA, 12K, 130G, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160G, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA
8W8124
HOUSING
12G, 12H, 12H ES, 12H NA, 12K, 130G, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160G
12G, 12H, 12H ES, 12H NA, 12K, 130G, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160G
1104652
HOUSING
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 160H, 160H ES, 160H NA, 163H NA
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 160H, 160H ES, 160H NA, 163H NA
3P7042
HOUSING-CLUTCH
14G, 14H, 14H NA, 16G, 16H, 16H NA
14G, 14H, 14H NA, 16G, 16H, 16H NA
8W8167
HOUSING
14G, 14H, 14H NA
14G, 14H, 14H NA
5T7127
HOUSING
16G, 16H, 16H NA
16G, 16H, 16H NA
8W7452
HOUSING
16G, 16H, 16H NA
16G, 16H, 16H NA
8D3777
HOUSING
12G, 130G
12G, 130G
9W8575
HOUSING AS-CLUTCH
637E, 69D, 768C, 769C, 769D, 770, 771C, 771D, 772, 772G, 772G OEM, AD40, AD45, AD45B, AD55, AE40, AE40 II, D400E II
637E, 69D, 768C, 769C, 769D, 770, 771C, 771D, 772, 772G, 772G OEM, AD40, AD45, AD45B, AD55, AE40, AE40 II, D400E II
9W9161
HOUSING AS
637E, 69D, 735, 740, 768C, 769C, 769D, 770, 771C, 771D, 772, AD40, AD45, AD45B, AD55, AE40, AE40 II, D400E II
637E, 69D, 735, 740, 768C, 769C, 769D, 770, 771C, 771D, 772, AD40, AD45, AD45B, AD55, AE40, AE40 II, D400E II
6G6054
HOUSING
637E
637E
6G6031
HOUSING
637E
637E
6G8490
HOUSING AS
627B
627B
2Y5454
HOUSING
930R
930R
8R6734
HOUSING AS-RH
936F, IT12B
936F, IT12B
8R6735
HOUSING AS-LH
936F, IT12B
936F, IT12B
5T3431
HOUSING-AXLE
621E
621E
9T6579
HOUSING AS
910E, IT12B, IT14B
910E, IT12B, IT14B