HUB AS 1094729 - Caterpillar

Table 1
Tools Needed
Part Number Part Name Quantity
6V-7775 Air Pressure Gauge 1
Illustration 1 g01112112
Typical single water temperature regulator housing
(1) Port
Illustration 2 g01112115
Typical dual water temperature regulator housing
(1) Port
Making contact with a running engine can cause burns from hot parts and can cause injury from rotating parts.When working on an engine that is running, avoid contact with hot parts and rotating parts.
Perform the following procedure in order to determine if the water pump is operating correctly:
Remove the plug from port (1).
Install the 6V-7775 Air Pressure Gauge in port (1).
Start the engine. Run the engine until the coolant is at operating temperature.
Note the water pump pressure. The water pump pressure should be 100 to 125 kPa (15 to 18 psi).