HUB-BRAKE 1970960 - Caterpillar

Illustration 1 g03818428
Right side view
Table 1
Specification for 241-7315 Hoe Stick Gp, and 290-9222 Hoe Stick Gp
Item Qty Part Specification description
All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all bores for the pins, the bucket, and the cylinder pin bores.
1 - - The stick cylinder must be assembled in order to orient the grease zerk, as shown.
2 1 4I-4811 Pin As Diameter is 69.850 0.025 mm (2.7500 0.0010 inch).
3 1 4I-4809 Pin As Diameter is 79.850 0.025 mm (3.1437 0.0010 inch).
4 4 166-1495 Lip Type Seal Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
5 2 235-7679 Lip Type Seal Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
Install the following bushings in the bore so that the part number of the bushing is facing outward.
6 The bushing (6) is one of the following part numbers:
2 228-5615 Bushing Bore before installation is 90.21 0.04 mm (3.552 0.002 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
2 244-4277 Bushing Bore before installation is 90.16 0.02 mm (3.550 0.001 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
7 2 228-5614 Bushing Bore before installation is 70.17 0.04 mm (2.763 0.002 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
8 2 228-5615 Bushing Bore before installation is 90.25 0.04 mm (3.553 0.002 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).