HUB 2G6338 - Caterpillar

Secure alternator guard assembly (25) to the side of the engine by using five bolts (26) and five hard washers (18).
Illustration 14 g03809360
(3) 6V-5839 Washer
(5) 5P-8245 Hard Washer
(14) 322-9743 Charging Alternator Gp
(26) 6V-1820 Bolt
(27) 356-7361 Cable As
(28) 6V-7673 Bolt
(29) 8Y-1816 Spacer
(30) 7S-3916 Clip
(31) 7S-3919 Clip
(32) 5G-3676 Grommet
Secure one end of cable assembly (27) to charging alternator group (14) by using the existing bolt. Torque the existing bolt to 6.2 0.6 N m (55 5.3 lb in).Slide the boot of cable assembly (27) over the connection.
Secure the other end of cable assembly (27) to the side of the engine by using bolt (28), hard washer (5), and spacer (29).Slide the boot of cable assembly (27) over the connection.Secure cable assembly (27) to the existing clip that was reinstalled in Step 6 by using bolt (26), hard washer (5), clip (30), clip (31), and grommet (32).
Illustration 15 g03809470
(3) 6V-5839 Washer
(14) 322-9743 Charging Alternator Gp
(25) 434-1013 Alternator Guard As
(26) 6V-1820 Bolt
(30) 7S-3916 Clip
(31) 7S-3919 Clip
(32) 5G-3676 Grommet
(33) 6V-4249 Bolt
(34) 1V-6645 Spacer
(35) 382-4652 Cable As
Secure one end of cable assembly (35) to the rear of charging alternator group (25) by using the existing hardware. Tighten the existing hardware to 11.25 2.25 N m (100 20 lb in).
Secure cable assembly (35) to alternator guard assembly (25) by using bolt (26), two bolts (33), three washers (3), two spacers (34), three clips (30), three clips (31), and three grommets (32).
Illustration 16 g03809498
(3) 6V-5839 Washer
(30) 7S-3916 Clip
(31) 7S-3919 Clip
(32) 5G-3676 Grommet
(35) 382-4652 Cable As
(36) 132-5789 Clip
(37) 2Y-5829 Nut
(38) 9X-6772 Cable Strap
Secure cable assembly (35) to the existing stud on the engine by using clip (36), nut (37), cable strap (38), and washer (3).Secure cable assembly (35) in three other locations on the side of the engine by using the existing hardware, three clips (30), three clips (31), and three grommets (32).
Illustration 17 g03810139
(30) 7S-3916 Clip
(31) 7S-3919 Clip
(32) 5G-3676 Grommet
(35) 382-4652 Cable As
(39) 154-6626 Bracket As
(40) 8T-4136 Bolt
(41) 8T-4121 Hard Washer
Secure cable assembly (35) to the frame in one location by using bracket assembly (39), bolt (40), hard washer (41), clip (30), clip (31), grommet (32), and the existing hardware from the chassis wiring group.Secure cable assembly (35) in two other locations by using two clips (30), two clips (31), two grommets (32), and the existing hardware from the chassis wiring group.
Illustration 18 g03810152
(35) 382-4652 Cable As
(42) 5P-6264 Grommet
Route cable assembly (35) through the available hole in the side breaker box assembly with grommet (42).
Illustration 19 g03810182
(35) 382-4652 Cable As
(A) Nut
(B) Washer
(C) Lockwasher
Secure cable assembly (35) to the breaker assembly by using the existing hardware from the breaker assembly. Tighten the nut to a torque of 6.3 0.5 N m (55 4.4 lb in).Slide the boot of cable assembly (35) over the connection.