HUB AS 3171300 - Caterpillar

Save Settings
Use the "Save Settings" dialog in order to save the display settings, machine settings, or both to a data card. From this dialog, you can save all the settings in the "Setup Menu – Configuration" dialog.The display file ("*.dsp") contains the following information:
Alignment Selection
Auto Pan Selection
Blade Focus
Beeper Configuration
Cross Section View - Text items
Display Brightness
Horizontal Offset
Layered Lift Selection
Lightbar Brightness
Lightbar Scales
Map Recording
On grade Tolerance
Operator Configuration
Overcut Protection selection
Perpendicular Lift selection
Plan View Rotation selection
Plan View - text items
Profile View - text items
Reference Surface selection
Text Views
Units
Vertical Lift
Vertical Offset
Vertical Offset Increment
Working SurfaceThe machine file (*.mch) contains the following information:
Avoidance Zone Distance
Blade Wear
FTP Support selection
GPS Accuracy mode
GPS Port
Machine Radio Network
GPS Receiver Configuration
Machine Dimensions
Valve Calibration
Vertical Guidance Method
Valve SpeedYou can customize and save the text items that are shown on the guidance screens by saving the display settings.In order to access the "Save Settings" dialog complete the following steps:
Make