HUB CAP AS 3374916 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Illustration 1 g01231658
Remove grill assembly (1). Repeat for the opposite side.
Illustration 2 g01231661
Disconnect hose assemblies (2) .
Illustration 3 g01231662
Remove bolts (3) .
Illustration 4 g01231663
Remove bolts (4). Remove bolts (5). Remove bracket (6). Remove fuel cooler (7) .Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 5 g01231663
Position fuel cooler (7). Install bracket (6) and install bolts (5). Install bolts (4) .
Illustration 6 g01231662
Install bolts (3) .
Illustration 7 g01231661
Connect hose assemblies (2) .
Illustration 8 g01231658
Install grill assembly (1). Repeat for the opposite side.