HUB 3827511 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     5P-3931     Anti-Seize Compound     1    
B     2P-2333     High Temperature Sealer     1    
Illustration 1 g01124442
Illustration 2 g01124434
Install a suitable lifting device to turbocharger (9). The weight of turbocharger (9) is approximately 50 kg (110 lb). Install turbocharger (9) .
Illustration 3 g01124443
Apply Tooling (A) to nuts (16). Install nuts (16). Tighten nuts (16) to a torque of 55 5 N m (41 4 lb ft).
Illustration 4 g01124416
Apply Tooling (B) to the joints of tube (15). Connect tube (15) to turbocharger (9). Tighten the clamp on the joint to the muffler to a torque of 68 12 N m (50 9 lb ft). Tighten the clamp on the joint to the turbocharger to a torque of 11 1 N m (8 1 lb ft).
Illustration 5 g01124407
Move oil level gauge (13) into position and install clip (14) .
Illustration 6 g01124402
Install the gasket to the bottom of turbocharger (9). Apply Tooling (A) to the bolts that secure tube assembly (12) and connect tube assembly (12) .
Illustration 7 g01124399
Move tubes (8) and (11) into position. Connect hoses (7) and (10) to turbocharger (9). Tighten the clamps that secure tube (8) to a torque of 8 1 N m (6 1 lb ft). Tighten the clamps that secure tube (11) to a torque of 11 1 N m (8 1 lb ft).
Illustration 8 g01124392
Connect tube assembly (6) .
Illustration 9 g01124232
Connect tube assembly (5). Install the gasket and connect tube assembly (4) .
Illustration 10 g01124226
Install panels (2) and (3) .
Illustration 11 g01124225
Install panel (1) .
Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".