HUB 4V9818 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 421-5660 Lifting Eyebolt Assembly 2 Start By:
Remove Torque Converter.
Remove Pump Drive.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g06247458
Remove bolts (1) and the washers.
Illustration 2 g06247462
Attach Tooling (A) and a suitable lifting device to pump assembly (2). Remove pump assembly (2).