6A6483 HUB Caterpillar parts
215, 215B
Rating:
Alternative (cross code) number:
CA6A6483
6A-6483
6A6483
CA6A6483
6A-6483
6A6483
Weight: 3 pounds 1 kg.
EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$391.07
17 Sep 2017
BLQ: BLQ
6A6483 HUB
6A6483 HUB
6A6483 HUB
This part in 4 request:
Show.
This information for suppliers only!
2024-09-18
2022-05-30
2022-05-30
2019-05-25
Number on catalog scheme:
6
For full view, you need register
Information:
MID 027 CID 0444 FMI 06Conditions Which Generate This Code:
Illustration 1 g01185104
Schematic of the Start Relay (Typical Example)
The possible cause of this diagnostic code are listed:
Wire 306-GN(Green) is shorted to the ground circuit.
The relay has failed.
The ECM has failed. This is unlikely.This diagnostic code is recorded when the ECM reads the current of the relay as above normal (short to ground).Note: This procedure can cause new diagnostic codes to be recorded. Ignore these created diagnostic codes. Complete the following procedure. Then clear the created diagnostic codes.System Response:The start relay will NOT energize.Test Step 1. CHECK THE RELAY.
Turn the disconnect switch and the key start switch to the ON position. DO NOT start the engine. Ensure that the diagnostic code for the relay is active.
Disconnect the machine harness from the relay.
Observe the status of the diagnostic code. The diagnostic code is
Illustration 1 g01185104
Schematic of the Start Relay (Typical Example)
The possible cause of this diagnostic code are listed:
Wire 306-GN(Green) is shorted to the ground circuit.
The relay has failed.
The ECM has failed. This is unlikely.This diagnostic code is recorded when the ECM reads the current of the relay as above normal (short to ground).Note: This procedure can cause new diagnostic codes to be recorded. Ignore these created diagnostic codes. Complete the following procedure. Then clear the created diagnostic codes.System Response:The start relay will NOT energize.Test Step 1. CHECK THE RELAY.
Turn the disconnect switch and the key start switch to the ON position. DO NOT start the engine. Ensure that the diagnostic code for the relay is active.
Disconnect the machine harness from the relay.
Observe the status of the diagnostic code. The diagnostic code is
Caterpillar parts catalog:
Parts hub Caterpillar catalog:
2P8598
HUB GP-CRANKSHAFT
215, 215B, 215C, 215D, 219D, 225, 225D, 229, 229D, 3304, 3306, 350, 515, 518, 518C, 525, 920, 930, 930R, 941, 950, 951B, 955K, 955L, D4D, D4E, D4E SR, FB518
215, 215B, 215C, 215D, 219D, 225, 225D, 229, 229D, 3304, 3306, 350, 515, 518, 518C, 525, 920, 930, 930R, 941, 950, 951B, 955K, 955L, D4D, D4E, D4E SR, FB518
120G, 12G, 130G, 140B, 140G, 14G, 14H NA, 160G, 16G, 16H NA, 215, 225, 235, 235C, 245, 245B, 3204, 3208, 330, 330 FM L, 330 L, 3304, 3304B, 3306, 3306B, 330B, 330B L, 3406, 3408, 3412, 515, 518C, 525,...
8J8349
HUB
225
225
3P0169
HUB
621R, D6C
621R, D6C
4310548
HUB
308E
308E
3917275
HUB-COUPLING
306E, 307E
306E, 307E
2307034
HUB
305.5E, 305E, A19, A26B
305.5E, 305E, A19, A26B
2110151
HUB
302.2D, 302.4D, 302.7D, A7B, T9B
302.2D, 302.4D, 302.7D, A7B, T9B
6W3989
HUB AS
225
225
4W8370
HUB AS
215B
215B
4W7409
HUB AS
215B
215B
12G, 140G, D6C
14G, D6C