HUB-CLUTCH 7T3056 - Caterpillar

Table 1
Required Tools    
Part Number     Description     Quantity    
JEBD3003     Caterpillar Electronic Technician (Cat ET)     1    
171-4401     Communication Adapter As     1    
207-6845     Adapter Cable As     1    
160-0141     Adapter Cable As     1    The Caterpillar Electronic Technician (Cat ET) is used to access the configuration screen . A message on the Cat ET screen will give instructions that guide the user through the procedure. Refer to the manual that is provided with the Cat ET software for more information about Cat ET.The Electronic Control Module (ECM) must be configured when the ECM has been replaced. The ECM must be configured before a calibration can be started.A check of the configuration screen could resolve a problem with the machine. A problem with a component could be identified as one of the following items:
A component is not installed.
A component is installed, but a change to the installation is needed in order to correct a problem.Follow these instructions to get to the configuration screen:
Connect the communications adapter and the computer to the diagnostic service tool connector.
Start the Caterpillar Electronic Technician (Cat ET).
Select "File". Go to "Select ECM". Choose the appropriate ECM.
Go to the "Service" Menu. Select "Configurations". Click "OK". Certain operations or characteristics can be changed.