HUB-SPROCKET 8E2481 - Caterpillar

The following service tools should be used to aid in troubleshooting the electrical system.
Table 1
Service Tools
Part Number Part
146-4080 Digital Multimeter
7X-1710 Multimeter Probe Group
8T-8726 3-Pin Cable Assembly
6V-3000 Connector Repair Kit (Sure Seal)
9U-7246 Connector Repair Kit (Deutsch DT Type)
4C-3406 Connector Repair Kit (Deutsch)
300-7925 Cable Assembly
300-7924 Cable
None Diagnostic Software
None Cat® Electronic Technician (Cat ET) Service Tool Reference: See Troubleshooting, "Determining Diagnostic Trouble Codes" for detailed instruction on the use of the diagnostic file.For instructions on servicing Sure Seal connectors, see Special Instruction, SMHS7531. For instructions on servicing Deutsch DT connectors, see Special Instruction, SEHS7734.Use the digital multimeter for making continuity checks or for measuring voltage. The 7X-1710 Multimeter Probe is used to measure the voltage without disconnecting the connector. The probe cables are pushed into the back of the connector along the wire. The 8T-8726 Adapter Cable is a three-pin breakout cable used for measurements in the sensor circuits.Note: For Cat electrical circuits, except for harness tests, use the 8T-0500 Continuity Tester or the 5P-7277 Voltage Tester.