HUB 8E9002 - Caterpillar

Engine Identification
Cat engines are identified with serial numbers, with performance specification numbers, and with arrangement numbers. In some of the cases, modification numbers are used. These numbers are shown on the Serial Number Plate and the Information Plate that are mounted on the engine.Cat dealers need these numbers to determine the components that were included with the engine. Information on the Serial Number Plate and the Information Plate allows dealers to identify replacement part numbers.Serial Number Plate
Illustration 1 g02871718
View of the Serial Number Plate on the left side of a typical 3500E Marine Engine. Components have been removed for visibility.
The Serial Number Plate is on the left side of the cylinder block near the rear of the engine.The following information is stamped on the Serial Number Plate: engine serial number, model, and arrangement number.
Illustration 2 g00123229
Typical Serial Number Plate
Information Plate
Illustration 3 g02871719
View of the Information Plate on the left side of a typical 3500E Marine Engine. Components have been removed for visibility.
The Information Plate is on the left side top surface of the cylinder block in front of the front cylinder head.
Illustration 4 g00102789
Typical Information Plate
The following information is stamped on the Information Plate: maximum altitude for engine operation, horsepower, high idle rpm, full load rpm, fuel settings, and other information.Dosing Cabinet Identification
The dosing cabinet identification plate is on the front of the dosing cabinet.CEM Identification
Illustration 5 g06067128
Typical location of the CEM identification plate. The identification plate is on top of the CEM housing. The specific location may be different depending on CEM configuration.