HUB-REACTION 9G8640 - Caterpillar

Remove Fuel Injection Lines
1. Disconnect the fuel injection lines from the camshaft housings.2. Disconnect the fuel injection lines from the fuel injection pump housing. 3. Remove the fuel injection line hold-down clamps (1) and clips (2).4. Remove the fuel injection lines.5. Install caps or plugs in all lines or openings.Install Fuel Injection Lines
1. Remove the caps (1) and plugs from lines and openings.2. Install the fuel injection lines in their respective positions.3. Connect lines to fuel injection pump housing and to camshaft housings and tighten the nuts on both ends of the lines to 30 5 lb. ft. (4,1 0,7 mkg).4. Install the hold-down clamps and clips.