HUB AS 9W8013 - Caterpillar

Separation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7574     Link Bracket     1    
B     138-7573     Link Bracket     3    
1U-9200 Lever Puller Hoist     1    Start By:
Remove the torque converter, the transmission, and the output transfer gears. Refer to Disassembly and Assembly, "Torque Converter, Transmission and Output Transfer Gears - Remove".Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01173182
Disconnect harness assemblies (2) and (5) .
Remove tube assembly (4) .
Remove bolts (3) and transmission oil pump (1) .
Illustration 2 g01173184
Remove tube assembly (6) .
Illustration 3 g01173186
Remove bolts (7) .
Illustration 4 g01173187
Attach Tooling (A) and a suitable lifting device to torque converter (8) .
Illustration 5 g01173188
Reposition torque converter (8), transmission (9), and output transfer gears (10). The combined weight of torque converter (8), transmission (9), and output transfer gears (10) is approximately 816 kg (1800 lb).
Remove Tooling (A) .
Illustration 6 g01173189
Attach Tooling (B) and a suitable lifting device to torque converter (8). The weight of torque converter (8) is approximately 170 kg (375 lb).
Illustration 7 g01173190
Remove bolts (11) .
Illustration 8 g01173192
Remove bolts (12) .
Illustration 9 g01173193
Remove Torque converter (8) from transmission (9) .