HYDRAULIC SW 0784148 - Caterpillar

Installation Procedure
Organize the parts for the guard assembly. Verify that all of the pieces are available.
Attach the work tool to the host machine.
Stop the engine of the host machine.
Assemble the guard kit according to the illustrations that relate to your work tool.Bucket
Illustration 1 g01443247
Bucket
Illustration 2 g01443535
BucketFork
Illustration 3 g01443458
Fork
Illustration 4 g01443672
Fork Rake
Illustration 5 g01443508
Rake
Illustration 6 g01443668
RakeModification Procedure for Snowblowers
Illustration 7 g01815455
Use the dimensions in Illustration 7 to drill one 12.7 mm (0.50 inch) hole (11) in the left hand guard plate. Repeat for the right hand guard plate.
Illustration 8 g01815457
Use the dimensions in Illustration 8 to drill two 12.7 mm (0.50 inch) holes (12) in the right side plate of the snowblower. Repeat for the left side.
Illustration 9 g01817198
Install the guards onto the snowblower. Use 8T-4185 Bolts (10) for the front holes and 8T-4186 Bolts (9) for the rear holes. Secure the bolts with washers (7) and wing nuts (6) .