HYDRAULIC PI 0790362 - Caterpillar

Install caps (26).
Illustration 6 g03687645
Illustration 7 g03687635
Illustration 8 g03687636
Connect cable assembly (24) onto the engine. Tighten the nuts (25).
Illustration 9 g03687634
Install hose assembly (23). Repeat for the other side.
Illustration 10 g03687633
Connect harness assembly (22).
Illustration 11 g03687632
Connect harness assembly (21) and install strap (20).
Illustration 12 g03687626
Illustration 13 g03687627
Connect harness assembly (19) and install nut (18).
Install straps (17).
Illustration 14 g03687624
Install reservoir (16) and bolt (15).
Illustration 15 g03687622
Install plate (14) and screws (13).
Illustration 16 g03687619
Install cover (12) and screws (11).
Illustration 17 g03687616
Picture for reference only
Install the loader linkage onto the loader bank valve. Install pins (10) and lockpins (9).
Illustration 18 g03687614
Reposition the transmission shift lever. Connect harness assembly (8). Install bolt (7).
Connect harness assemblies (6) and (5).
Illustration 19 g03687612
Install plate (4) and screws (3).
Illustration 20 g03687602
Install cover (2) and screws (1). End By:
Install the steering metering pump.
Install the seat.
Install the parking brake. Refer to Disassembly and Assembly, UENR2400, "Parking Brake - Remove and Install".
Install the tire and rim (rear). Refer to Disassembly and Assembly, UENR2400, "Tire and Rim (Rear) - Remove and Install".