HYDRAULIC AR 1209578 - Caterpillar

Obey all state and local laws governing the mass, width and length of a load. Observe all regulations governing wide loads.
When you move the machine to a colder climate, make sure that the cooling system has the proper antifreeze.
Illustration 1 g00303463
Before you load the machine, chock the trailer wheels or the rail car wheels, as shown.
Move the machine into position and engage the parking brake. If the machine is equipped with an optional canopy then the machine should be facing rearward when the machine is positioned on the trailer.
Stop the engine and engage the service lock valves. Refer to the Operation and Maintenance Manual, "Service Lock" for further information.
Block the machine, and tie down the machine. Refer to the Operation and Maintenance Manual, "Lifting and Tying Down the Machine" for more information.
Lock the doors and the access covers. Attach any vandalism protection. Install the cover on the console. Cover the operator seat.
To protect the cooling systems, mix the solution of antifreeze and water. The solution should provide protection to the lowest expected outside temperature. Drain the excess coolant into a suitable container.
Perform a walk-around inspection and measure the fluid levels in the various compartments.
Travel at a moderate speed. Observe all speed limitations when you are roading the machine. Consult your Caterpillar dealer for shipping instructions for your machine.