HYDRAULIC AR 2128996 - Caterpillar

will be used differently with different applications. This means that windows will be configured differently for specific applications. For example, "Grade Plan" windows are used typically for grade and slope control and "Ore Plan" windows are typically used in material handling. Tools on the toolbars will be configured differently for specific applications. For example, an operator of a front shovel machine will need to activate the "Send Truck" command when the operator has finished loading a truck. On the other hand, a Track-Type Tractor will never load a truck. Therefore, the tractor will never use this function.This section explains the use of CAESultra in relation to applications for grade and slope. The following items are discussed in this section:
CAESultra windows that are used for grade and slope
Selecting "*.cat" files and automatic file selection
Modifying "Flat Plane" designs
Modifying "Inclined Plane" designs
Using the "Move Design" function
Configuring a switch for the ripper
Describing the Digital Terrain Model that is used to describe the surfaces on the CAESultra system
Creating and using points that identify important locations that are identified on the work site
Using both avoidance zones and avoidance surfaces in order to stay clear of hazardsReferenceFor additional information about configuring the CAESultra windows, refer to Systems Operation Manual, KENR6338, "Screen Configure".