HYDRAULIC PUMP ASSEMBLY 7J6476 - Caterpillar

Procedure For Activating Product Link In The Vision Link System
Start the Product Link registration and subscription activation process when starting the PDI process.
After 60 minutes into the machine PDI process, turn the key switch to the ON position and keep the key switch in the ON for another 30 minutes. Apply a safety label to the machine to remind all about the keyswitch ON status.
In Vision Link, if the asset status is showing location and machine hours, go to Step 5.
Illustration 1 g03322811
Illustration 2 g03322813
Illustration 3 g03322815
Illustration 4 g03323801
In Vision Link if the asset is still "Awaiting First Report" after the 30 minute period, call the Product Link Service Desk 0510 8029 5010 to confirm data transition status. Refer to Illustration 1 to 4.
Illustration 5 g03323776
Synchronize hour meter through Cat ET.Note: Synchronizing hour meter can be performed in Vision Link if the asset is Reporting in Vision Link. For synchronizing, refer to Illustration 5.
Illustration 6 g03323780
Illustration 7 g03323781
Illustration 8 g03323782
Illustration 9 g03323783
Illustration 10 g03323784
Using Cat ET capture the GPS and GSM screens by "print to file" and upload to SIMSi. Refer to Illustrations 6 to 10.