HYDRAULIC CONTROL ARRANGEMENT 9F4598 - Caterpillar

Illustration 27 g06221318Drawing information*:
FT-3419 Platform Hoist Cylinder Upper Pin
FT-3492 Platform Dump Body PinPublications:
KENR8382 Disassembly and Assembly
RENR2588 Disassembly and Assembly
RENR2037 Disassembly and AssemblyFabricated Tool Drawing for Final Drive Oil Drain Tray
Illustration 28 g06244899Drawing information*:
FT-3348 Cart AsPublications:
KENR8372 Disassembly and Assembly
RENR2036 Disassembly and Assembly
RENR2577 Disassembly and AssemblyFabricated Tool Drawing for Torque Converter Housing Gear Assembly
Illustration 29 g06256343Drawing information*:
FT-3518 Installer AsPublications:
KENR8372 Disassembly and AssemblyBody Pivot Pin Support Bracket - Receiver Sleeve
Illustration 30 g06256351 541-9332 SleevePublications:
M0086655 Tool Operating Manual (English)
KENR8382 Disassembly and AssemblyBall Stud Breaker
Illustration 31 g06216330 524-5362 Hydraulic Hammer Gp 524-5342 Hydraulic Pump Gp (460V/60Hz/3Ph) 524-5343 Hydraulic Pump Gp (230V/60Hz/3Ph) 524-5344 Hydraulic Pump Gp (415V/50Hz/3Ph) 524-5345 Hydraulic Pump Gp (380V/50Hz/3Ph) 524-5346 Hydraulic Pump Gp (600V/60Hz/3Ph)Publications:
Service Magazine, M0084873, "New Steering Ball Stud Breaker for 789, 793, 795 and 797 Large Off-Highway Trucks"Final Drive Axle Removal and Installation Tool
Illustration 32 g06301906 487-8638 Tool As 487-8639 Plate As 524-9350 Adapter AsPublications:
M0091691 Tool Operating Manual (English)
KENR8372, RENR2577, RENR2036 (Disassembly and Assembly)Fabricated Tool Drawing for Torque Converter Skid Mobility Option
Illustration 33 g06301899Drawing information*:
FT-3553 SKID GP - TC STANDPublications:
KENR8372 Torque Converter - Remove and Install
RENR2577 Torque Converter - Remove
RENR2036 Torque Converter - RemoveHedweld Variable Work Table and Cylinder Removal Tooling
Illustration 34 g06301926 554-5063 Lift As 554-5064 Head Tilt 554-5065 Handler AsPublications:
NEHS1306 Tool Operating Manual (English)
KENR8382 Hoist Cylinder Remove and InstallSynthetic Body Cables
Illustration 35 g063449642X 530-3242 Cable As - former 336-07432X 533-1156 Clevis - former 219-5893Publications:
NEHS1325 Tool Operating Manual (English)Information regarding Hoist Trunnion Machining Center
Hydratight is the Caterpillar recommended on-site field machining supplier providing tooling through sale or rental.Hydratight also offers on-site technical support and service. Contact solutions@hydratight.com, or find your local representative at: hydratight.com/contact.References
For all media numbers referenced, access Cat service information system (SIS) for most current version.*Customer: For additional information contact your local dealer.*Dealer: Access information through regular channels.