1154926 IDLER & BEARING AS Caterpillar parts
311, 311B, 312, 312B, 315, 315B L, 315C, 317, 317B LN, 318B, 318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 321C, OEMS
Rating:
Alternative (cross code) number:
CA1154926
115-4926
1154926
CA1154926
115-4926
1154926
Weight: 160 pounds 72 kg.
EXCAVATOR, UNDERCARRIAGE,
Compatible equipment models: 1154926:
Number on catalog scheme:
1
For full view, you need register
Information:
Illustration 1 g00864183
Attach a suitable lifting device to tilt cylinder (1) .
Remove bolts (2) and cover (3) .
Illustration 2 g00864469
Disconnect hose assemblies (4) from tilt cylinder (1) .
Illustration 3 g01142346
Remove bolts (7), cap (5), and shims (6) from tilt cylinder (1) .
Illustration 4 g01142347
Illustration 5 g01142348
Remove bolts (8) and retainer (9) .
Remove pin (12) from tilt cylinder (1) .
Use the suitable lifting device in order to remove tilt cylinder (1). The weight of tilt cylinder (1) is approximately 92 kg (203 lb).Disassembly and Assembly Information
Table 1
Required Tools
Tool Part Number Part Description Qty
A 127-4904 Hydraulic Cylinder Repair Stand 1
B 195-4609 Seal Pick 1
C 7M-7456 Bearing Mount Compound 1
D 1P-0808 Multipurpose Grease
Cylinders equipped with lock valves can remain pressurized for very long periods of time, even with the hoses removed.Failure to relieve pressure before removing a lock valve or disassembling a cylinder can result in personal injury or death.Ensure all pressure is relieved before removing a lock valve or disassembling a cylinder.
Illustration 6 g01142352
(1) Apply Tooling (D) onto the nut prior to installation. Tighten the nut to a torque of 3000 300 N m (2213 221 lb ft). (2) Lubricate the lips of the seals with the lubricant that is being sealed. (3) Apply Tooling (C) onto the seal groove.Installation Procedure
Illustration 7 g01142348
Illustration 8 g01142347
Use a suitable lifting device in order to position tilt cylinder (1). The weight of tilt cylinder (1) is approximately 92 kg (203 lb).
Install pin (10), retainer (9), and bolts (8) to tilt cylinder (1) .
Illustration 9 g01142346
Install cap (7), shims (8), and bolts (5) to tilt cylinder (1) .
Illustration 10 g00864469
Connect hose assemblies (4) to tilt cylinder (1) .
Illustration 11 g00864183
Install cover (3) and install bolts (2) to tilt cylinder (1) .End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Caterpillar parts catalog:
Parts idler Caterpillar catalog:
330, 330 FM L, 330 L, OEMS
320 L, 322 FM L, 325, 325 FM L, 325 LN, 330C, 330D, 336D L, 336D LN, 345D, 349D L, OEMS
1290T, 1390, 2491, 2590, 330, 330 FM L, 330 L, 330B L, 330D, 345C L, 345D, 349D L, 532, 541, 551, 552, 552 2, OEMS, TK732, TK751, TK752
311, 311B, 312, 312B, 315, 315B, 315B FM L, 315B L, 315C, 317, 317B LN, 318B, 318C, 319C, 320 L, 320B, 320B FM LL, 320B L, 320B U, 320C, 320C FM, 320N, 321B, 321C, 325D, 329D L, 345C L, OEMS
517, D5HTSK II, OEMS
318C, 320C, 320C L, 321C
320 L, 320N
320, 320 L, 320N
330, 330 FM L, 330 L, OEMS
330, 330 FM L, 330 L, 330B L, OEMS
318B, 320B, 320B L, 320B U, OEMS
311, 311B, 311C, 311D LRR, 311F LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, E110B, E120B
3456934
IDLER
329E LN, 924K, C4.4
329E LN, 924K, C4.4
3433466
IDLER AS
C4.4, C7.1
C4.4, C7.1
3421308
IDLER AS
C4.4, C7.1, CP-54B, CP-68B, CP-74B, CS-54B, CS-56B, CS-64B, CS-66B, CS-76B, CS-78B
C4.4, C7.1, CP-54B, CP-68B, CP-74B, CS-54B, CS-56B, CS-64B, CS-66B, CS-76B, CS-78B
3295247
IDLER
C7.1
C7.1
3445602
IDLER AS
C9.3
C9.3
320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D L, 323D2 L, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336...
303, 303.5
2624781
IDLER & BEARING AS
311C, 313D2 LGP, 315C, 315D L, 316E L, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320...
311C, 313D2 LGP, 315C, 315D L, 316E L, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320...
302.5
2264050
IDLER
301.5, 301.6C
301.5, 301.6C
2778668
IDLER & BEARING AS
307, 307B, 307C, 307D, 307E, 308C
307, 307B, 307C, 307D, 307E, 308C
6I6590
IDLER & BEARING AS
311, 311B, 311C, 311D LRR, 311F LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, E110B, E120B
311, 311B, 311C, 311D LRR, 311F LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, E110B, E120B