1445612 IDLER GP-BELT Caterpillar parts
3116, 3512C, 3516B, 789D, 793D, 797B, 854G, 992G, 994F, 994H, C9
Rating:
Alternative (cross code) number:
CA1445612
144-5612
1445612
CA1445612
144-5612
1445612
Weight: 2 pounds 0 kg.
INDUSTRIAL ENGINE, WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$15.00
01 Mar 2024
AU: AYAO Woodworkin
AYAO Band Saw Blades 56-7/8 Inch X 1/4-Inch X 12TPI, 2-Pack
AYAO Can fit Craftsman V.S. 24453, 24460 Shopcraft and Duracraft VS312 & BBS412 || Ground teeth, extraordinarily sharp and can stay sharp longer || Raker set teeth arrangement, all teeth arranged evenly for better cutting performance || Unique welding technique: strong and smoother welding point || Thickness: 0.45mm, Wood cutting
AYAO Can fit Craftsman V.S. 24453, 24460 Shopcraft and Duracraft VS312 & BBS412 || Ground teeth, extraordinarily sharp and can stay sharp longer || Raker set teeth arrangement, all teeth arranged evenly for better cutting performance || Unique welding technique: strong and smoother welding point || Thickness: 0.45mm, Wood cutting
Number on catalog scheme:
3
For full view, you need register
Compatible equipment models: 1445612:
Information:
All 3400 Series EnginesThe recommendation has changed for the position of the oil hole during installation of the camshaft bearings.
The correct position for the oil hole in the camshaft bearing is on the horizontal centerline of the bearing bore. This position is 90 15° away from the oil hole in the block and will ensure that the oil hole is not located in a highly loaded area.
The outside of the camshaft bearing has a groove running around its circumference. This allows the oil to flow from the cylinder block, around the camshaft bearing and out the hole in the bearing to lubricate the camshaft.
Formerly the oil holes in the bearings were aligned with the oil holes in the block bore. This is the procedure shown in the Service Manual for these engines. This procedure put the bearing oil hole in a highly loaded area. The result was less bearing surface in the area that carries the load.
The interruption of the smooth surface due to the oil hole can also result in a loss of oil film in the event of minimum lubrication.
Make a note in your Service Manual of this change.
The correct position for the oil hole in the camshaft bearing is on the horizontal centerline of the bearing bore. This position is 90 15° away from the oil hole in the block and will ensure that the oil hole is not located in a highly loaded area.
The outside of the camshaft bearing has a groove running around its circumference. This allows the oil to flow from the cylinder block, around the camshaft bearing and out the hole in the bearing to lubricate the camshaft.
Formerly the oil holes in the bearings were aligned with the oil holes in the block bore. This is the procedure shown in the Service Manual for these engines. This procedure put the bearing oil hole in a highly loaded area. The result was less bearing surface in the area that carries the load.
The interruption of the smooth surface due to the oil hole can also result in a loss of oil film in the event of minimum lubrication.
Make a note in your Service Manual of this change.
Caterpillar SIS machinery equipment:
Caterpillar SIS
992G Wheel Loader 7HR00001-UP (MACHINE) POWERED BY 3508B Engine »
144-5612
IDLER GP-BELT
854G Wheel Tractor 1JW00001-UP (MACHINE) POWERED BY 3508B Engine »
144-5612
IDLER GP-BELT
992G Wheel Loader ADZ00001-UP (MACHINE) POWERED BY 3508 Engine »
144-5612
IDLER GP-BELT
854G Wheel Tractor AMP00001-UP (MACHINE) »
144-5612
IDLER GP-BELT
994F Wheel Loader 44200001-UP (MACHINE) POWERED BY 3516 Engine »
144-5612
IDLER GP-BELT
793D Off-Highway Truck FDB00001-UP (MACHINE) POWERED BY 3516B Engine »
144-5612
IDLER GP-BELT
854G Wheel Dozer A4W00001-UP (MACHINE) POWERED BY 3508B Engine »
144-5612
IDLER GP-BELT
992G Wheel Loader AZX00001-UP (MACHINE) POWERED BY 3508B Engine »
144-5612
IDLER GP-BELT
797B Off-Highway Truck JSM00001-UP (MACHINE) »
144-5612
IDLER GP-BELT
3512C Engine MLM00001-UP »
144-5612
IDLER GP-BELT
C9 Engine for Combat and Tactical Vehicles LFE00001-UP »
144-5612
IDLER GP-BELT
789D Off-Highway Truck SPD00001-UP (MACHINE) POWERED BY 3516 Engine »
144-5612
IDLER GP-BELT
994H Wheel Loader DWC00001-UP (MACHINE) POWERED BY 3516B Engine »
144-5612
IDLER GP-BELT
789D XQ Off-Highway Truck SHH00001-UP (MACHINE) POWERED BY 3516 Engine »
144-5612
IDLER GP-BELT
Unit Rig (MT4400) TRE00001-UP POWERED BY 3516B Engine »
144-5612
IDLER GP-BELT
Cat MT4400D AC Off-Highway Truck MH400001-UP (MACHINE) POWERED BY 3516C GEN SET Electric Power Generation »
144-5612
IDLER GP-BELT
Caterpillar parts catalog:
Parts idler Caterpillar catalog:
1979651
IDLER GP-BELT
3126B, 3126E, C7, C9, CX31-C9I, TH31-E61
3126B, 3126E, C7, C9, CX31-C9I, TH31-E61
1206661
IDLER GP-BELT
3116, 3126, 3126B, 3126E, AP-755, C-9, C7, CB-514, CB-614
3116, 3126, 3126B, 3126E, AP-755, C-9, C7, CB-514, CB-614
12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 24M, 2864C, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 374F L, 390F L, 521B, 522B, 541 2, 552 2, 568 FM ...
D6R, D6R II, D6R III, D6T, D6T LGP, D6T XL
2696159
IDLER GP-FRONT
AP-655D, BG655D
AP-655D, BG655D
1342920
IDLER GP-TRACK
D6H, D6R
D6H, D6R
1641048
IDLER GP-TRACK
939C, D5C III
939C, D5C III
1979651
IDLER GP-BELT
3126B, 3126E, C7, C9, CX31-C9I, TH31-E61
3126B, 3126E, C7, C9, CX31-C9I, TH31-E61
1941169
IDLER GP-FRONT
325C, 330C, 330C L
325C, 330C, 330C L
3116, 3126, 3126B, 3126E, AP-755, C-9, C7, C9, CX31-C9I, TH31-E61
120H, 12H, 135H, 3126B, 525C, 535C, 545C, 613G, 815B, 844, 938G II, 938H, 950G II, 950H, 962G II, 962H, 966G II, 966H, 972G II, 972H, 980C, 990 II, C-9, C15, C18, C7, C9, D5R LGP, D6N, D8N, IT38G II, ...
2T1122
IDLER GP-ELEVATOR CHAIN ADJUST
613C, 613C II
613C, 613C II
2456551
IDLER GP-FRONT
551, 552, 552 2, TK751, TK752
551, 552, 552 2, TK751, TK752
D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL