IDLER & BEARING AS 1483730 - Caterpillar

Fingers can be burned from hot pins and bushings.The pins and bushings in a dry joint can become very hot. It is possible to burn the fingers if there is more than brief contact with these components.
Use the recommendations in order to extend the life of the undercarriage. Use the recommendations in order to avoid excessive downtime.
Illustration 1 g01209916
During the machine operation, listen for unusual squeaking and for unusual squealing. This can indicate a dry joint.
Check the machine for dry joints weekly. Check for dry joints immediately after machine operation. After machine operation, lightly touch the end of each track pin or bushing. Touch the track pin or the track bushing with the back of your hand. Make a mark on any dry track pin joint that is very hot to the touch.
Do not hit the ends of the track pins with a sledge hammer in order to loosen the track joints.
Striking the end of a track pin introduces a significant amount of end play into the track joint and can result in early failures.
Consult your Caterpillar dealer's Custom Track Service expert if you detect dry joints or leaks. Your Caterpillar dealer's Custom Track Service expert can perform track inspection.