IDLER AS-CLA 1885610 - Caterpillar

Disassembly Procedure
Table 1
Required Tooling
Item Part number Part Description Qty
A 1P-0510 Driver Gp 1 Start By:
Remove the gear pump. Refer to Disassembly and Assembly, "Gear Pump (Power Train) - Remove".
Illustration 1 g01397532Note: Put orientation marks on the pump body for assembly purposes.
Remove bolts (2) and pump manifold (1).
Illustration 2 g01431725
Remove O-ring seal (3). Use Tooling (A) and a suitable press to remove bearings (4).
Illustration 3 g01431726
Remove housing (5), gear (6), and gear (7).
Illustration 4 g01397550
Remove key (8).
Illustration 5 g01431728
Remove O-ring seal (9).
Illustration 6 g01431733
Remove pump housing (10).
Illustration 7 g01431739
Remove O-ring seal (11). Use Tooling (A) and a suitable press to remove bearings (12).
Illustration 8 g01431768
Remove housing (13), gear assembly (14), and gear assembly (15).
Illustration 9 g01431775
Remove O-ring seal (16). Use Tooling (A) and a suitable press to remove bearings (17) from housing (18).