IDLER 2264050 - Caterpillar

Illustration 1 g03589147
Front side of the torque converter (Output side)
(1) Modulating valve for the torque converter lockup clutch
(2) Modulating valve for the impeller clutch
Illustration 2 g03133241
(1) Modulating valve for the torque converter lockup clutch
(2) Modulating valve for the impeller clutch The modulating valve for the torque converter lockup clutch is located on the output side of the torque converter. The valve is positioned just above the modulating valve for the impeller clutch.The modulating valve for the torque converter lockup clutch basically controls the flow of oil to the torque converter lockup clutch. The modulating valve engages the lockup clutch. The valve also disengages the lockup clutch in response to various operating conditions . The lockup clutch will provide better machine performance during load and carry applications. The lockup clutch also provides better performance during light to medium dozing.The modulating valve for the torque converter lockup clutch is an output of the power train electronic control module (ECM). The ECM will analyze the proper control data. When the ECM determines that the conditions are correct, the ECM will energize the valve. Once the modulating valve has been energized, the lockup clutch is engaged. Engaging the lockup clutch allows the output shaft of the torque converter to turn at a speed that is consistent with the engine output. The engagement of the torque converter lockup clutch basically provides a direct transfer of power from the engine output to the torque converter output. Operation of the lockup clutch can be affected by the following items:
Lockup enable switch
Transmission speed switch
Transmission direction switch
Torque converter output speed
Engine speed
The position of the left service brake pedalThe power train ECM has parameters that will enable the modulating valve. The modulating valve will then engage the lockup clutch. When the input speed of the transmission rises above 1520 RPM, the ECM will signal the modulating valve to engage the lockup clutch. The ECM also has parameters that will disengage the lockup clutch. If the input speed of the transmission falls below 1370 RPM, the ECM will signal the modulating valve to disengage the lockup clutch. There are other input conditions that may cause the ECM to signal the lockup clutch to disengage.Reference: For information on calibrating the clutch solenoid modulating valves, refer to the service manual module Testing and Adjusting, "Calibration" of the machine that is being serviced.Reference: For more information on the power train electronic control module (ECM), refer to the service manual module Systems Operation, "Electronic Control Module " of the machine that is being serviced.