IDLER & BEARING AS 2348968 - Caterpillar

2348968 IDLER & BEARING AS Caterpillar parts 302.5C

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2348968
234-8968
2348968

Weight: 43 pounds 19 kg.

Buy IDLER & BEARING AS 2348968 Caterpillar genuine, new aftermarket tractor parts with delivery
MINI HYD EXCAVATOR,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

WZCNLXLX Front Idler Wheel 234-8968 2348968 For CAT 302.5C Mini Excavator

$595.55

20 Feb 2025

CN: LONGXUN

WZCNLXLX Front Idler Wheel 234-8968 2348968 For CAT 302.5C Mini Excavator
WZCNLXLX Item Name:Front Idler || Item Number:234-8968 2348968 || Application:For CAT 302.5C Mini Excavator || Note: If you are unsure if the product is suitable.In order not to delay your use of the parts, please provide your engine nameplate or serial number and part number, and we will help you confirm if it is suitable. To avoid unnecessary returns, please check the product image and part number to ensure it is the product you want. || Tip: Please contact us - we are a professional sales team and we have many products to offer to you. Many buyers are very satisfied with our service. You can get first-class products and high-quality services from us, believe me, you will have a pleasant shopping experience here.

ZGZJYBL Front Idler Wheel 234-8968 2348968 For CAT 302.5C Mini Excavator

$635.22

20 Feb 2025

CN: YIBOLONG-Store

ZGZJYBL Front Idler Wheel 234-8968 2348968 For CAT 302.5C Mini Excavator
ZGZJYBL Item Name:Front Idler Wheel || Item Number:234-8968 2348968 || Application:For CAT 302.5C Mini Excavator || Attention: If you are unsure if the product is suitable for your machine model. In order not to delay your use of the parts, please provide your engine nameplate or serial number and part number, and we will help you confirm if it is suitable. To avoid unnecessary returns, please carefully check the product image and part number to ensure that it is the product you want. Thank you for your support and understanding! || Tip: If you need any other parts, please contact us - we are a professional sales team and have many products to offer to you. Many buyers are very satisfied with our service. You can get first-class products and high-quality services from us, believe me, you will have a pleasant shopping experience here.

Number on catalog scheme: 8

Caterpillar 2348968 Parts scheme IDLER & BEARING AS

For full view, you need register

Compatible equipment models: 2348968:

MINI HYD EXCAVATOR 302.5C Caterpillar

Information:

Illustration 1 g02789461
Schematic of the "Boom Cylinder Extend Limit" Solenoid
This diagnostic code is associated with the "Boom Cylinder Extend Limit" Solenoid. The FMI 06 diagnostic code means that the Machine ECM has determined that the current of the solenoid circuit is above normal. Some possible causes of this diagnostic code are listed below:
The energize circuit of the solenoid is shorted to ground.
The solenoid has failed.
The Backup Crane switch has failed.
The ECM has failed. This situation is unlikely. Before performing this procedure, inspect the harness connectors that are involved in the circuit. Poor connections can often be the cause of a problem in an electrical circuit. Verify that all connections in the circuit are clean, secure and in good condition. If a problem with a connection is found, correct the problem and verify that this diagnostic code is active before performing this procedure. Note: The following test procedure may create other diagnostic codes. Ignore these created diagnostic codes and clear these diagnostic codes when the original diagnostic code has been corrected. Note: The resistance of the solenoid coil should be 8.7 .4 ohms at 25 °C (77.0 °F).Test Step 1. CHECK THE SOLENOID
Turn the disconnect switch and the key start switch to the ON position. Do not start the engine.
Observe the status of the diagnostic code.
Disconnect the solenoid from the machine harness. Expected Result:The active CID 2420 FMI 06 diagnostic code changes to a CID 2420 FMI 05 diagnostic code when the solenoid is disconnected.Results:
YES - The active CID 2420 FMI 06 diagnostic code changes to a CID 2420 FMI 05 diagnostic code when the solenoid is disconnected. The circuit is correct.Repair: The solenoid has failed. Repeat this test "CHECK THE SOLENOID" in order to verify the solenoid failure. Replace the solenoid.STOP
NO - The CID 2420 FMI 06 remains active when the solenoid is disconnected. The solenoid is not the cause of the problem. Proceed to Test Step 3.Test Step 2. CHECK THE OPERATION OF THE BACKUP CRANE SWITCHThe disconnect switch and the key start switch remain OFF. The machine harness connectors for the solenoid and the ECM remain disconnected.
Remove the "Backup Crane" switch from the wiring harness.
Measure the resistance between pin 11 and pin 12 of the switch.
Toggle the switch to the ON position.
Measure the resistance between pin 11 and pin 12 of the switch.
Toggle the switch to the OFF position.
Measure the resistance between pin 11 and pin 12 of the switch.
Reconnect the switch to the wiring harness. Expected Result:The switch should be open in the OFF position and closed in the ON position.Results:
OK - The switch operates as expected. Proceed to Test Step 3.
NOT OK - The switch is either open for both positions or closed for both positions.Repair: Replace the switch.STOPTest Step 3. CHECK THE ENERGIZE CIRCUIT OF THE SOLENOID FOR A SHORT TO GROUND
Turn the key start switch and the disconnect switch to the OFF position.
The solenoid remains disconnected from the machine harness.
Disconnect the machine harness connectors J1 and J2 from the ECM.
At the machine