2624781 IDLER & BEARING AS Caterpillar parts
311C, 313D2 LGP, 315C, 315D L, 316E L, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320...
Rating:
Alternative (cross code) number:
CA2624781
262-4781
2624781
CA2624781
262-4781
2624781
Weight: 198 pounds 89 kg.
EXCAVATOR, UNDERCARRIAGE,
This part in 2 request:
Show.
This information for suppliers only!
2023-12-07
2021-01-25
Compatible equipment models: 2624781:
Information:
Software Group Release Date
Used to read the software release date in month and year format.Software Group Description
Used to read the software group description.Monitoring System Parameters
Illustration 17 g06261924Service Mode Enable Code
Used to read and program the code/password to enable the service mode for the monitoring system.Display Language Status
Used to read and program the status of the monitoring system display language for the selected operator within the Operator Data Transfer protocol. Languages supported are included in the table. Not all languages may be applicable to every machine.
Table 1
Supported Languages
English Spanish French Portuguese
German Norwegian Swedish Finnish
Dutch Danish Italian Greek
Turkish Indonesian Russian Japanese
Hungarian Icelandic Arabic Traditional Chinese
Czech Polish Simplified Chinese Thai
Slovenian Slovakian Estonian Latvian
Lithuanian Malaysian Korean Portuguese (Brazil)
Farsi Hebrew Serbian Croatian
Bulgarian Romanian Vietnamese Mongolian
Macedonian Burmese Khmer Ukrainian Information Units Status
Used to read and program the selected display units on the monitoring system. The status for the units can be either "English Units" or "Metric Units".Backlight Percent
Used to read and program the monitoring systems display backlight percent for the selected operator within the Operator Data Transfer protocol. Valid data range is 0 to 100%.Object Detection Definitions
ECM Identification Parameters
Illustration 18 g06261938Product ID
Used the read and program the product identification number i.e. the Caterpillar serial number.ECM Part Number
Used to read the part number of the control module hardware.ECM Serial Number
Used to read the electronic control module serial number.Software Group Part Number
Used to read the software group part number.Software Group Release Date
Used to read the software release date in month and year format.Software Group Description
Used to read the software group description.Camera System
Illustration 19 g06261939Camera #1 Location
Used to read and program the location on the machine where camera #1 is installed. This indicates the location of the camera on the machine and not the view covered by the camera. Valid location configurations are "Ripper", "Left", "Right", "Front", "Rear", and "Not Installed".Camera #2 Location
Used to read and program the location on the machine where camera #2 is installed. This indicates the location of the camera on the machine and not the view covered by the camera. Valid location configurations are "Ripper", "Left", "Right", "Front", "Rear", and "Not Installed".Automatic Camera View Dimming Enable Status
Used to read and program whether the automatic camera view dimming feature is enabled. Camera view will automatically dim once application reaches a certain state for example machine driving above certain ground speed, the dimming helps reducing distractions to operator. Status is either "Enabled" or "Disabled".Radar System
Illustration 20 g06261972Object Detection Alarm Mode
Used to read and program the alarm mode that sounds when an object is detected near the machine. In "Continuous" mode, anytime the system detects an object, an audible alarm will sound, starting with a frequent alarm at some distance away then will progressively shorten in period as the object travels closer to the sensor, and will end with a constant tone when an object is sufficiently close. In "Discrete"mode, two beeps indicate that an object has only entered the critical zone for the first time since enabling the alarm system with the intended machine direction, say 2m to
Used to read the software release date in month and year format.Software Group Description
Used to read the software group description.Monitoring System Parameters
Illustration 17 g06261924Service Mode Enable Code
Used to read and program the code/password to enable the service mode for the monitoring system.Display Language Status
Used to read and program the status of the monitoring system display language for the selected operator within the Operator Data Transfer protocol. Languages supported are included in the table. Not all languages may be applicable to every machine.
Table 1
Supported Languages
English Spanish French Portuguese
German Norwegian Swedish Finnish
Dutch Danish Italian Greek
Turkish Indonesian Russian Japanese
Hungarian Icelandic Arabic Traditional Chinese
Czech Polish Simplified Chinese Thai
Slovenian Slovakian Estonian Latvian
Lithuanian Malaysian Korean Portuguese (Brazil)
Farsi Hebrew Serbian Croatian
Bulgarian Romanian Vietnamese Mongolian
Macedonian Burmese Khmer Ukrainian Information Units Status
Used to read and program the selected display units on the monitoring system. The status for the units can be either "English Units" or "Metric Units".Backlight Percent
Used to read and program the monitoring systems display backlight percent for the selected operator within the Operator Data Transfer protocol. Valid data range is 0 to 100%.Object Detection Definitions
ECM Identification Parameters
Illustration 18 g06261938Product ID
Used the read and program the product identification number i.e. the Caterpillar serial number.ECM Part Number
Used to read the part number of the control module hardware.ECM Serial Number
Used to read the electronic control module serial number.Software Group Part Number
Used to read the software group part number.Software Group Release Date
Used to read the software release date in month and year format.Software Group Description
Used to read the software group description.Camera System
Illustration 19 g06261939Camera #1 Location
Used to read and program the location on the machine where camera #1 is installed. This indicates the location of the camera on the machine and not the view covered by the camera. Valid location configurations are "Ripper", "Left", "Right", "Front", "Rear", and "Not Installed".Camera #2 Location
Used to read and program the location on the machine where camera #2 is installed. This indicates the location of the camera on the machine and not the view covered by the camera. Valid location configurations are "Ripper", "Left", "Right", "Front", "Rear", and "Not Installed".Automatic Camera View Dimming Enable Status
Used to read and program whether the automatic camera view dimming feature is enabled. Camera view will automatically dim once application reaches a certain state for example machine driving above certain ground speed, the dimming helps reducing distractions to operator. Status is either "Enabled" or "Disabled".Radar System
Illustration 20 g06261972Object Detection Alarm Mode
Used to read and program the alarm mode that sounds when an object is detected near the machine. In "Continuous" mode, anytime the system detects an object, an audible alarm will sound, starting with a frequent alarm at some distance away then will progressively shorten in period as the object travels closer to the sensor, and will end with a constant tone when an object is sufficiently close. In "Discrete"mode, two beeps indicate that an object has only entered the critical zone for the first time since enabling the alarm system with the intended machine direction, say 2m to
Cat SIS web machinery list:
Parts idler Caterpillar catalog:
2394386
IDLER GP-FRONT
315D L, 318E L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D2 L, 323E L
315D L, 318E L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D2 L, 323E L
2487143
IDLER GP-FRONT
311C, 313D2 LGP, 315C, 315D L, 316E L, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320...
311C, 313D2 LGP, 315C, 315D L, 316E L, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320...
2394385
IDLER GP-FRONT
315D L, 318E L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D2 L, 323E L
315D L, 318E L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D2 L, 323E L
1028152
IDLER GP-FRONT
1290T, 1390, 2491, 2590, 330, 330 FM L, 330 L, 330B L, 330D, 345C L, 345D, 349D L, 532, 541, 551, 552, 552 2, OEMS, TK732, TK751, TK752
1290T, 1390, 2491, 2590, 330, 330 FM L, 330 L, 330B L, 330D, 345C L, 345D, 349D L, 532, 541, 551, 552, 552 2, OEMS, TK732, TK751, TK752
1132907
IDLER GP-FRONT
311, 311B, 312, 312B, 315, 315B, 315B FM L, 315B L, 315C, 317, 317B LN, 318B, 318C, 319C, 320 L, 320B, 320B FM LL, 320B L, 320B U, 320C, 320C FM, 320N, 321B, 321C, 325D, 329D L, 345C L, OEMS
311, 311B, 312, 312B, 315, 315B, 315B FM L, 315B L, 315C, 317, 317B LN, 318B, 318C, 319C, 320 L, 320B, 320B FM LL, 320B L, 320B U, 320C, 320C FM, 320N, 321B, 321C, 325D, 329D L, 345C L, OEMS
2394344
IDLER GP-FRONT
318C, 320C, 320C L, 321C
318C, 320C, 320C L, 321C
1156419
IDLER GP-FRONT
318B, 320B, 320B L, 320B U, OEMS
318B, 320B, 320B L, 320B U, OEMS
4I7337
IDLER GP-FRONT
311, 311B, 311C, 311D LRR, 311F LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, E110B, E120B
311, 311B, 311C, 311D LRR, 311F LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, E110B, E120B
5I7611
IDLER AS
311B, 311C, 312C, 312C L, 314C, 318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D LRR, 321B, 321C, 323D L, 323D LN
311B, 311C, 312C, 312C L, 314C, 318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D LRR, 321B, 321C, 323D L, 323D LN
1157471
IDLER & BEARING AS
1090, 2290, 320 L, 320B, 320C, 322B L, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D FM, 324D FM LL, 325 FM L, 325B, 325B L, 325C, 325C FM, 325C L, 325D, 325D FM, 325D FM LL, 325D L, 329D, 329D L, 329...
1090, 2290, 320 L, 320B, 320C, 322B L, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D FM, 324D FM LL, 325 FM L, 325B, 325B L, 325C, 325C FM, 325C L, 325D, 325D FM, 325D FM LL, 325D L, 329D, 329D L, 329...
1129947
IDLER & BEARING AS
1290T, 1390, 2491, 2590, 330, 330 FM L, 330B L, 330D, 345C L, 345D, 349D L, 532, 541, 551, 552, 552 2, OEMS, TK732, TK751, TK752
1290T, 1390, 2491, 2590, 330, 330 FM L, 330B L, 330D, 345C L, 345D, 349D L, 532, 541, 551, 552, 552 2, OEMS, TK732, TK751, TK752
2979108
IDLER GP-FRONT
320C FM
320C FM
1404005
IDLER AS
302.5
302.5
2264050
IDLER
301.5, 301.6C
301.5, 301.6C
2778668
IDLER & BEARING AS
307, 307B, 307C, 307D, 307E, 308C
307, 307B, 307C, 307D, 307E, 308C
6I6590
IDLER & BEARING AS
311, 311B, 311C, 311D LRR, 311F LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, E110B, E120B
311, 311B, 311C, 311D LRR, 311F LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, E110B, E120B
1154926
IDLER & BEARING AS
311, 311B, 312, 312B, 315, 315B L, 315C, 317, 317B LN, 318B, 318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 321C, OEMS
311, 311B, 312, 312B, 315, 315B L, 315C, 317, 317B LN, 318B, 318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 321C, OEMS
3456934
IDLER
329E LN, 924K, C4.4
329E LN, 924K, C4.4
5I7611
IDLER AS
311B, 311C, 312C, 312C L, 314C, 318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D LRR, 321B, 321C, 323D L, 323D LN
311B, 311C, 312C, 312C L, 314C, 318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D LRR, 321B, 321C, 323D L, 323D LN
1453018
IDLER & BEARING AS
307B, 307C, 308C
307B, 307C, 308C
2184687
IDLER
304.5, 305
304.5, 305
1542229
IDLER
304.5, 305
304.5, 305
1722018
IDLER
303, 303.5
303, 303.5
1722100
IDLER GP-FRONT
303, 303.5
303, 303.5