2900738 IDLER & BEARING AS Caterpillar parts
D6N
Rating:
Alternative (cross code) number:
CA2900738
290-0738
2900738
CA2900738
290-0738
2900738
Weight: 247 pounds 112 kg.
TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
This part in 2 request:
Show.
This information for suppliers only!
2024-07-04
2024-07-03
Compatible equipment models: 2900738:
Information:
(5)Batteries
Do not smoke when observing battery electrolyte level. Batteries give off fumes that can explode.Electrolyte is an acid and can cause personal injury if it contacts skin or eyes.
1. Clean the top of the batteries and remove the fill caps. Observe electrolyte level.2. Maintain the electrolyte level to the bottom of filler openings. Use distilled water.(6)Pre-Lube Pump-Earlier type
1. Check the oil level.2. Maintain the oil between the ADD and FULL marks on the dipstick.(7)Zinc Rods-Salt water only
1. Stop the engine. 2. Remove the two zinc rods from the raw water pump outlet. 3. Remove the two zinc rods from the aftercooler line. 4. Tap the zinc rods lightly with a small hammer.5. Inspect the rods. If the zinc rod has deteriorated, or flakes apart when tapped, install a new zinc rod.Installing New Zinc Rod
1. Unscrew or drill the existing rod from the plug base.2. Install a new rod in the plug base.3. Install the plug.
Do not smoke when observing battery electrolyte level. Batteries give off fumes that can explode.Electrolyte is an acid and can cause personal injury if it contacts skin or eyes.
1. Clean the top of the batteries and remove the fill caps. Observe electrolyte level.2. Maintain the electrolyte level to the bottom of filler openings. Use distilled water.(6)Pre-Lube Pump-Earlier type
1. Check the oil level.2. Maintain the oil between the ADD and FULL marks on the dipstick.(7)Zinc Rods-Salt water only
1. Stop the engine. 2. Remove the two zinc rods from the raw water pump outlet. 3. Remove the two zinc rods from the aftercooler line. 4. Tap the zinc rods lightly with a small hammer.5. Inspect the rods. If the zinc rod has deteriorated, or flakes apart when tapped, install a new zinc rod.Installing New Zinc Rod
1. Unscrew or drill the existing rod from the plug base.2. Install a new rod in the plug base.3. Install the plug.
Caterpillar parts catalog:
Parts idler Caterpillar catalog:
1921563
IDLER GP-BELT
120H, 12H, 135H, 3126B, 525C, 535C, 545C, 613G, 815B, 844, 938G II, 938H, 950G II, 950H, 962G II, 962H, 966G II, 966H, 972G II, 972H, 980C, 990 II, C-9, C15, C18, C7, C9, D5R LGP, D6N, D8N, IT38G II, ...
120H, 12H, 135H, 3126B, 525C, 535C, 545C, 613G, 815B, 844, 938G II, 938H, 950G II, 950H, 962G II, 962H, 966G II, 966H, 972G II, 972H, 980C, 990 II, C-9, C15, C18, C7, C9, D5R LGP, D6N, D8N, IT38G II, ...
1901546
IDLER GP-TRACK
D5R LGP, D6M, D6N, D6N LGP, D6N OEM
D5R LGP, D6M, D6N, D6N LGP, D6N OEM
3231168
IDLER GP-TRACK
D6N, D6N LGP
D6N, D6N LGP
1901547
IDLER & BEARING AS
D5R LGP, D6M, D6N, D6N LGP, D6N OEM
D5R LGP, D6M, D6N, D6N LGP, D6N OEM
3231169
IDLER & BEARING AS
D6N, D6N LGP
D6N, D6N LGP
2284231
IDLER
963C
963C
2616763
IDLER AS
963C
963C
1592084
IDLER & BEARING AS
572R, D7R
572R, D7R
6Y0553
IDLER & BEARING AS
583R, 583T, 587R, 587T, D8N, D8R, D8R II, D8T, PL83, PL87
583R, 583T, 587R, 587T, D8N, D8R, D8R II, D8T, PL83, PL87
1902495
IDLER & BEARING AS
561M, 561N, D5M, D5N, PM-201, PM-565B
561M, 561N, D5M, D5N, PM-201, PM-565B
2500368
IDLER AS
D5G
D5G
2497628
IDLER & BEARING AS
D3G, D4G
D3G, D4G
2096075
IDLER AS
D3G, D4G, D5G
D3G, D4G, D5G
2284230
IDLER
953C
953C