IDLER GP-FRONT 2945338 - Caterpillar

Removal Procedure
Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Sulfuric Acid Burn Hazard, may cause serious personal injury.The clean gas induction (CGI) valve may contain a small amount of sulfuric acid. The use of fuel with sulfur levels greater than 15 ppm may increase the amount of sulfuric acid formed. The sulfuric acid may spill from the CGI cooler during service of the engine and may travel to other downstream components. The sulfuric acid will burn the eyes, skin, and clothing on contact. Always wear the appropriate personal protective equipment (PPE) that is noted on a material safety data sheet (MSDS) for sulfuric acid. Always follow the directions for first aid that are noted on a material safety data sheet (MSDS) for sulfuric acid.
Illustration 1 g01362180
Disconnect hose (1) .
Disconnect harness assemblies (2) and (5) .
Remove bolts (3) and disconnect tube assembly (4) .
Illustration 2 g01362202
Disconnect hose assemblies (6) .
Illustration 3 g01362195
Remove clamp assembly (7) and remove the clean gas induction valve (8) .