IDLER GP-FRONT 2V3857 - Caterpillar

TYPE="TABLE" @@@-->
Illustration 1 g01367395
(A) Inlet valves (B) Exhaust valves (C) Fuel injection pumpBore ... 137.2 mm (5.40 inch)Stroke ... 152.4 mm (6.00 inch)Displacement ... 18 L (1099 cu in)Cylinder arrangement ... 65 degrees V8Note: In order to check the engine valve lash setting, the engine must be cold and the engine must be stopped.Engine valve lash settings Inlet valves ... 0.38 mm (0.015 inch) Exhaust valves ... 0.76 mm (0.030 inch)Type of combustion ... Direct InjectionFiring Order ... 1, 8, 4, 3, 6, 5, 7, 2The crankshaft rotation is viewed from the flywheel end of the engine. Direction of rotation ... CounterclockwiseThe direction of rotation of the fuel pump camshaft is viewed from the pump drive end of the fuel injection pump. Direction of rotation ... CounterclockwiseNumber one cylinder is the front cylinder on the left side of the cylinder block.Number two cylinder is the front cylinder on the right side of the cylinder block.Note: The front of the engine is opposite of the flywheel end of the engine. The left side of the engine and the right side of the engine are viewed from the flywheel end of the engine.