IDLER GP-TRACK 3231168 - Caterpillar

Lift Kickout
Use caution to avoid possible personal injury when adjusting the attachment lift kickout.Keep personnel off the machine. Clear the area when working under or around the attachment linkage.With the attachment raised, proper support must be provided for the attachment and/or the linkage.
Start the engine. Raise the bucket to the desired lift kickout height and stop the engine.
Illustration 1 g00811775
Lift Kickout Positioner (1) Magnet. (2) Bolts. (3) Control Group. (4) Bolts.
Loosen bolts (4). Adjust control group (3) so the center edge of magnet (1) is even with the center of control group (3) .
Tighten bolts (4) .
Loosen bolts (2). Adjust control group (3) so the face is 8 2 mm (0.32 0.08 inch) from magnet (1) .
Tighten bolts (2) .
To check the adjustment, start the engine. Move the bucket lift lever to the RAISE detent position.When the bucket reaches the preset lift height, the bucket lift lever should return to the HOLD position.
If the kickout position is not correct, perform Steps 1 through 6 again.