IDLER GP-TRACK 4569904 - Caterpillar

Bulldozer Blade Control Lever
Float (1) - Push the lever forward into detent, the blade will lower to the ground and move up and down, following ground contour. The lever will remain in detent until pulled out. The lever will then return to HOLD when released. Lower (2) - Push the lever forward to lower the blade. The lever will return to HOLD when released. The blade will remain in the position it is in. Hold (3) - The blade will remain in the position it is in. Raise (4) - Pull the lever back to raise the blade. The lever will return to HOLD when released. The blade will remain in the position it is in.Bulldozer Blade Tilt Lever
Tilt left (1) - Move the lever to the left (towards the operator). The blade will tilt left. The lever will return to HOLD when released. The blade will remain in the position it is in. Hold (2) - The blade will remain in the position it is in. Tilt Right (3) - Move the lever to the right (away from the operator). The blade will tilt right. The lever will return to HOLD when released. The blade will remain in the position it is in.Bulldozer Blade Tip Lever
Tip Forward (1) - Push the lever forward and the top of the blade will tip forward. The lever will return to HOLD when released. The blade will remain in the position it is in. Hold (2) - The blade will remain in the position it is in. Tip Back (3) - Pull the lever back and the top of the blade will tip back. The lever will return to HOLD when released. The blade will remain in the position it is in.